Hach Flo-Dar Basic User Manual

Basic User Manual Manuel d'utilisation de base Manual básico del usuario Manual Básico do Usuário 基本用户手册 基本取扱説明書 기본 사용 설명서 ...

English..............................................................................................................................3 Français......................................................................................................................... 30 Español................................................................. ...

6 Operation on page 25 7 Maintenance on page 25 Table of Contents 1 Table of contents on page 3 2 Expanded manual version on page 3 3 Specifications on page 3 4 General information on page 4 Section 2 Expanded manual version For additional information, refer to the expanded version of this manual, which is available on the manufactu ...

Method: Piezo resistive pressure transducer with stainless steel diaphragm Auto zero function maintains zero error < 0.5 cm (0.2 in.) Range: 3.5 m (138 in.); overpressure rating: 2.5 × full scale Velocity measurement Method: Pulsed radar - Doppler Range: 0.23–6.10 m/s (0.75–20 ft/s) Frequency Range: EU M ...

equipment in any manner other than that specified in this manual. 4.1.1 Use of hazard information D A N G E R Indicates a potentially or imminently hazardous situation which, if not avoided, will result in death or serious injury. W A R N I N G Indicates a po ...

law. This standard directly affects more than 250,000 industrial sites in the United States and was created to protect the health and safety of workers in confined spaces. Definition of a confined space: A confined space is any location or enclosure that has (or h ...

correct the interference at their expense. The following techniques can be used to reduce interference problems: 1. Disconnect the equipment from its power source to verify that it is or is not the source of the interference. 2. If the equipment is connected ...

1 Flo-Dar sensor with optional surcharge velocity sensor 3 Mounting frame 2 Flow logger or controller 4 Non-hazardous environment 4.4 Product components Make sure that all components have been received. Refer to Figure 2 and Figure 3. If any items are missing or damaged, contact the manufacturer or a sales representative imm ...

1 Flo-Dar sensor 4 Surcharge velocity sensor (SVS) (optional) 2 Extended range sensor (optional) 5 Flo-Dar connector and SVS connector 3 Bubble level 6 Flo-Dar with bare-wire and SVS with bare-wire 1 Figure 3 Wall mount hardware 1 Wall mount bracket 7 Standard frame 2 Spacer, 12-inch 8 Spacer, 2¼-inch 3 ...

D A N G E R Explosion hazard. Trained personnel only must install or commission the equipment. 5.1 Mechanical installation 5.1.1 Site location guidelines N O T I C E To prevent damage to the enclosure, install the instrument away from direct sunlight, ultraviolet radiation (UV), heat sources and severe weather. Install a sun shade or p ...