Axis Network Camera AXIS 221 Installation Manual

Page 3 ENGLISH ENGLISH ENGLISH AXIS 221/223M Installation Guide This installation guide provides instructions for installing the AXIS 221/223M on your network. For all other aspects of using the product, please see the User’s Manual, available on the CD included in this package, or from www.axis.com/techsup Installation ste ...

Hardware overview Dimensions HxWxD = 49 x 88 x 200mm (1.9" x 3.5" x 7.9") Weight = 620g (21.9oz) (power supply not included) Status indicator Zoom puller (Tele/wide) Focus puller DC-Iris PS-K power adapter connector 10-pin I/O terminal connector Power Power indicator Network indicator Reset/Control button connector RS- ...

Page 5 ENGLISH ENGLISH ENGLISH Connect the cables 1. Connect the camera to the network using a shielded network cable. 2. Optionally connect external input/output devices, e.g. alarm devices. See page 11 for information on the terminal connector pins. 3. Optionally connect an active speaker and/or external microphone (AXIS 22 ...

Assign an IP address To make it accessible on the network, the AXIS 221/223M must be assigned an IP address. Depending on the number of cameras you wish to install, the recommended method for assigning IP addresses in Windows is either AXIS IP Utility or AXIS Camera Management. Use the method that best suits your purpo ...

Page 7 ENGLISH ENGLISH ENGLISH AXIS IP Utility - single camera/small installation AXIS IP Utility automatically discovers and displays Axis devices on your network. The application can also be used to manually assign a static IP address. Note that the computer running AXIS IP Utility must be on the same network segment (physi ...

AXIS Camera Management - multiple cameras/large installations AXIS Camera Management can automatically find and set IP addresses, show connection status, and manage firmware upgrades for multiple Axis video products. Automatic discovery 1. Check that the camera is connected to the network and that power has been applie ...

Page 9 ENGLISH ENGLISH ENGLISH Set the password When accessing the AXIS 221/223M for the first time, the ‘Configure Root Password’ dialog will be displayed. 1. Enter a password and then re-enter it, to confirm the spelling. Click OK. 2. Enter the user name root in the dialog. Note: The default administrator user name ‘r ...

Other methods of setting the IP address The table below shows the other methods available for setting or discovering the IP address. All methods are enabled by default, and all can be disabled. Set the IP address with ARP/Ping 1. Acquire an IP address on the same network segment your computer is connected to. 2. Locat ...