Satel OPU-4 P Manual 

(which are listed in detail in Table 1). They are made of white polystyrene and can be installed indoors. The OPU-4 P housing is designed for surface mounting, and the OPU-4 PW housing – for flush mounting. The housing c ...

3 1. Mounting of the housing 1. Insert the plastic plugs for PCB fastening into appropriate holes in the housing base (the marks make it easier to select the suitable holes – see Figure 1 and Table 1). 2. Run the cables through the holes in housing base. 3. Using four screws, secure the housing base to the mounting surface (if there ...

SATEL SATEL sp. z o.o. • ul. Budowlanych 66 • 80-298 Gdańsk • POLAND tel. +48 58 320 94 00 www.satel.eu ...