Satel Versa Programming Manual

ul. Budowlanych 66 80-298 Gdańsk POLAND tel. +48 58 320 94 00 www.satel.eu versa_p_en 11/17 Alarm Control Panel Firmware Version 1.09 ...

that can lead to malfunction or even damage to the equipment. SATEL's goal is to continually upgrade the quality of its products, which may result in some changes of their technical specifications and firmware. The current information on the introduced modifications is ...

Global parameters New option: BACKLIGHT OFF ON AC LOSS. Partitions New option: ENTRY DELAY IN NIGHT ARM. Ethernet module Changed names of options:  SATEL SERVER (LAN) has been replaced with LAN,  GET DATE AND TIME FROM A TIME SERVER (LAN) has been replaced with LAN. New options:  DO NOT REPORT SATE ...

2.1 Starting the service mode ............................................................ ...

8.2 Keypad .................................................................. ...

...

 keypad,  computer with DLOADX program installed (locally or remotely). Local programming (using the keypad or DLOADX program) is possible, if one the following conditions is met:  PERMANENT ACCESS option is enabled (SERV. ACCESS user function ([code] 0. SERVICE 5 ...

depending on the type of keypad in which the lowest address is set:  LCD: the , and LEDs of the second partition will be lit, and the message “Restore factory settings ? 1=Yes” will come up on the display,  LED: the and LEDs of the second partition w ...

table 4). Some programming steps may be sometimes not available. 2.5 Entering data The changes entered will be saved after pressing the key. Use the key to quit the function without saving changes. 2.5.1 LCD keypad The data being entered are presented on ...

key mode [ABC] key mode [abc] 1 # 1 # 2 B C 2 a b c 3 D E F 3 d 4 4 5 5 6 6 7 7 8 8 9 9 0 0 Table 1. Characters available in the keypad when entering telephone numbers (to change the letter case, press ). Special character Function description B switch-over to pulse dialing C switch-over to tone dialing ...