Satel INTEGRA Plus Programming Manual

ul. Budowlanych 66 80-298 Gdańsk POLAND tel. + 48 58 320 94 00 www.satel.eu integra_plus_p_en 05/19 Alarm Control Panels INTEGRA Plus Firmware Version 1.19 ...

that can lead to malfunction or even damage to the equipment. SATEL aims to continually improve the quality of its products, which may result in changes in their technical specifications and software. Current information about the changes being introduced is available ...

Expansion modules Support for new modules: ACU-220 and ACU-280 (ABAX 2 wireless system controllers). Wireless devices Support for ABAX 2 wireless devices. Zones REPORTING DELAY option available for the 8. EXTERIOR zone type. Outputs New ON/OFF option (for the 24. MONO SWITCH type outputs). Mode of operation of the 12 ...

2. Configuring the control panel with keypad ........................................................................ 5 2.1 Starting the service mode .......................................... ...

5.4 Output triggering ...................................................................................................... 65 5.5 Clearing alarm in partitions .............................................. ...

11.2.1 Events assignment ..................................................................................................... 93 11.3 E-mail messaging parameters and options ....................................................... ...

– INTEGRA 64 Plus – INTEGRA 128 Plus – INTEGRA 256 Plus The control panel may be programmed: • locally – LCD keypad, – computer with the DLOADX program installed, connected to the control panel RS-232 or USB port, • remotely – computer with t ...

When entering the service mode in the normal way is not possible (the control panel does not support LCD keypads, does not accept the service code, etc.), you can use the emergency procedure, so-called, starting “from pins”. 1. Turn off the control panel power supply (first disconnect the ...

GUARDX tel. No Block SM Block DWNL SM sounds Hide SM now Hide SM after Structure System Objects Edit object New object Delete object Partitions Settings [select partition by name] Type Dep. partitions Timers 1..32 Timers 33..64 Options 2 cds to arm 2 cds to d-arm C ...

ABAX confirmat. INT-IT-wt.2cd. Rem. RX key fobs Copy RX keyfobs Rem. ABAX kfobs Copy ABAX kfobs Names [select device by type and address] DT1 short Tmp.alw.ld.DT1 DT2 short Tmp.alw.ld.DT2 Identification LCD keypads id. Expanders id. Keypads addr. EOL R1 res ...