Deprag MICROMAT-E 320E19-0008 Operating Instruction Booklet

EC-Screwdriver, for stationary use 320E19-0002 405024 A 320E19-0008 405024 B 320E19-0005 405024 C MICROMAT-E ...

manufacturing of tools for the industrial market. We kindly ask, that you read these operating instructions carefully, so that you will be able to use this tool safely and for many years to come. If you need additional information, please contact your DEPRAG Repres ...

Before operating tool, make sure to carefully read and always observe these operating instructions. Generally, the operator of the equipment and/or machinery is responsible for the equipment’s perfect condition and operation, while observing all necessary safety regulations. This equipment has been constructed in ac ...

• Disconnect the spindle from the power supply, prior to changing bits. • Do not wear loose clothing or jewelry; for movable parts can seize them. Wear a hairnet, if operator has long hair. • Keep hands off the installed bit or socket. • Injury is possible, if the driver reacts wi ...

The owner is obliged to only let persons operate the equipment, who • are familiar with basic work environment safety rules and accident- preventing regulations. Also, those persons must have been instructed in the correct use of the equipment. • have read and understood all safety and warning notifications in the Operating Instru ...

Unless otherwise specified, our “General Sales and Delivery Conditions” apply. Warranty and liability claims in regards to persons or equipment damages are invalid, if one or several of the following causes apply: • Use of the equipment in a non-designated application. • Improper installation, operation, service or maint ...

Read and observe the Operating Instruction Booklet, prior to and during operation of tool. DANGER Reference to an immediate danger to a person. May lead to serious injuries or even death, if unobserved! Properly recycle environmentally damaging grease, cooling agents or detergents. RECOMMENDATIONS Important or additional information ...

may only be performed by specially trained personnel! Disconnect equipment from air supply, prior to repair of pneumatic or hydraulic equipment. Provide regular preventive maintenance on hoses and airlines. Exchange hose lines, even if there is no visible damage! (Observe corresponding requirement ...

When working on or with the equipment, it is imperative to observe all requirements in regards to waste-disposal and proper recycling. Especially during installation, repair or maintenance, water damaging agents such as • lubricating grease and oil • hydraulic fluid • cooling agents • solvent-containing cleani ...

The essential characteristics of this screwdriver series are: • brush-less EC-Drive with commutator over encoder • torque- and angle-controlling The EC-Screwdriving System is designed for the use in an industrial envi- ronment for a maximum torque of 0,2 / 0,5 resp. 0,8 Nm (de ...