Panasonic AW-HE130WP Operating Instructions Manual

Model No.  AW-HE130KP Model No.  AW-HE130WE Model No.  AW-HE130KE Operating Instructions Excerpted Version Installation Instructions provided HD Integrated Camera Before operating this product, please read the instructions carefully and save this manual for future use. z About the instruction manuals •�Operating Instructions ...

ENGLISH •�How�to�open�the�operating�instruction�manual�PDF�files Discontinue�installation�if�the�installation�screen�of�the�software�opens� as�a�result�of�inserting�the�CD-ROM. When�[INDEX.pdf]�on�the�CD-ROM�is�opened,�a�list�of�the�operating� instruction�manuals�will�be�disp ...

Installation Instructions Contents Read�this�first!�....................................................................................... 4 Installation�precautions�........................................................................ 5 Before�installation�................................................................................. 7 ...

Read�this�first! WARNING: To�prevent�injury,�this�apparatus�must�be�securely�attached�to� the�floor/wall�in�accordance�with�the�installation�instructions. WARNING: Installation�should�only�be�performed�by�qualified�installation� personnel. Improper�installation�may�result�in�the�entire�appar ...

Installation Instructions Installation�precautions Panasonic�does�not�accept�any�responsibility�for�accident�or�damage�during�installation�if�procedure�in�this�manual�is�not� followed. To�installation�personnel Read�the�“Installation�Instructions”�thoroughly�and�then�perform�the�operation�co ...

� Before�installation,�always�disconnect�the�power� plug When�installing,�always�use�the�supplied�components. Do�not�disassemble�or�modify�the�wall�mount�adaptor. � Tightening�up�the�mounting�screws •�Tighten�up�the�screws�and�bolts�securely�to�the�degree�that�is� appropriate�f ...

Installation Instructions Be�sure�to�configure�the�switches�on�the�connector�panel�and�bottom�of�the�unit�before�installing�it. Configuring�the�switches�after�the�unit�is�installed�may�prove�difficult. Before�installation IR�ID�switch�settings The�IR�ID�switches�are�located�on�the� ...

Be�absolutely�sure�to�read�through�the�“Read�this�first!”�(→�page�4)�and�“Installation�precautions”�(→pages�5�to�6) The�procedure�given�here�is�for�the�kind�of�installation�where�the�unit�is�suspended�from�an�overhead�surface,�but�the�same�steps�are�followed�f ...

Installation Instructions 2.�Mount�the�mount�bracket�onto�the�installation�surface. •�Use�the�bracket�mounting�screws�(M4,�bind-head:�10�mm�long)�supplied�with�the�unit. •�For�proper�clamping�torque,�securely�attach�the�screws�using�the�specified�tools. Screw� diameter Clamping�torqu ...

4.�Mount�the�unit. •�Align�the�position�of�the�hole�for�checking�the�positioning�with�the�status�display�lamp. •�Align�the�holes�on�the�camera�main�unit�used�to�insert�the�bottom�panel�with�the�protrusions�on�the�mount�bracket�used�for�inserting�the�camera,� push� ...