BenQ GL2440 Operation & User’s Manual

reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permi ...

Copyright .......................................................................................................................... 2 Disclaimer ......................................................................................................................... 2 Getting started ........................................................ ...

When unpacking please check you have the following items. If any are missing or damaged, please contact the place of purchase for a replacement. BenQ LCD Monitor Monitor Base Quick Start Guide CD-ROM Power Cord (Picture may differ from product supplied for your region.) Video Cable: D-Sub ...

the monitor. The fitted foam packing is ideal for protecting the monitor during transport. Video Cable: DVI-D (Optional accessory for models with DVI inputs, sold separately) ...

2. Getting to know your monitor Front view Back view 1. Control buttons 2. Power button 2 1 3. AC Power Input jack 4. DVI-D socket (Analog-only models do not have the DVI-D input socket) 5. D-Sub socket 6. Lock switch • Above diagram may vary depending on the model. • Picture may differ from product supplied for your region ...

3. How to assemble your monitor hardware If the computer is turned on you must turn it off before continuing. Do not plug-in or turn-on the power to the monitor until instructed to do so. 1. Attach the monitor base. Please be careful to prevent damage to the monitor. Placing the screen surface on an object like a sta ...

2. Connect the PC video cable Do not use both DVI-D cable and D-Sub cable on the same PC. The only case in which both cables can be used is if they are connected to two different PCs with appropriate video systems. (Not available for analog-only models). To Connect the D-Sub Cable Connect the plug of the D-Sub cable (a ...

4. Connect-to and turn-on the power. Plug the other end of the power cord into a power outlet and turn it on. Picture may differ from product supplied for your region. Turn on the monitor by pressing the power button on the right of the monitor. Turn on the computer too, and follow the instructions in Section 4: Gett ...

How to detach the stand base 1. Prepare the monitor and area. Turn off the monitor and the power before unplugging the power cable. Turn off the computer before unplugging the monitor signal cable. Protect the monitor and screen by clearing a flat open area on your desk and placing a soft item like a towel on the desk ...