BenQ MX880UST Operation & User’s Manual

2 Table of contents Important safety instructions .........................3 Introduction........................7 Projector features .................................. 7 Shipping contents.................................. 8 Projector exterior view.......................... 9 Controls and functions ....................... 10 Positioning yo ...

3 Important safety instructions Your projector is designed and tested to meet the latest standards for safety of information technology equipment. However, to ensure safe use of this product, it is important that you follow the instructions mentioned in this manual and marked on the product. Safety Instructions 1. Please read t ...

4 Safety Instructions (Continued) 7. The lamp becomes extremely hot during operation. Allow the projector to cool for approximately 45 minutes prior to removing the lamp assembly for replacement. 8. Do not operate lamps beyond the rated lamp life. Excessive operation of lamps beyond the rated life could cause them to break on ra ...

5 Safety Instructions (Continued) 13. Do not place this projector in any of the following environments. - Space that is poorly ventilated or confined. Allow at least 50 cm clearance from walls and free flow of air around the projector. - Locations where temperatures may become excessively high, such as the inside of a car with a ...

6 Safety Instructions (Continued) 17. Do not step on the projector or place any objects upon it. Besides probable physical damage to the projector, doing so may result in accidents and possible injury. 18. Do not place liquids near or on the projector. Liquids spilled into the projector may cause it to fail. If the projector doe ...

design to deliver high reliability and ease of use. The projector offers the following features. • Network Settings allowing management of projector status from a computer using a web browser • Short throw lens to create ...

are missing, please contact your place of purchase. Standard accessories The supplied accessories will be suitable for your region, and may differ from those illustrated. *The warranty card is only supplied in some specific regions. ...

1. External control panel (See "Controls and functions" on page 10 for details.) 2. Lamp cover 3. Mirror 4. IR remote sensor 5. Projection lens 6. Focus ring 7. Vent (cool air intake) 8. Speaker grill 9. Vent (heated air exhaust) 10. AC power jack 11. Ceiling mount holes 12. Adjuster feet 13. 12V DC output terminal Used ...

Projector 9. AUTO Automatically determines the best picture timings for the displayed image. 10. Keystone/Arrow keys ( / Up, / Down) Manually corrects distorted images resulting from an angled projection. 11. POWER Toggles the projector between standby mode and on. 12. Right/ Activates panel key lock. When the On-Scree ...