DMP Electronics XR6 COMMAND PROCESSOR Programming Manual

properly in strict accordance with the manufacturer's instructions, may cause interference with radio and television reception. It has been type tested and found to comply with the limits for a Class B computin ...

XR6/XR10 Programming Guide TABLE OF CONTENTS Page Section Introduction 1.1 Before You Begin............................................................. 1 1.2 Getting Started .............................................................. 1 1.3 Programming Menu .......................................................... 2 1.4 Pr ...

Digital Monitoring Products iv TABLE OF CONTENTS Page Section System Reports 5.1 SYSTEM REPORTS ............................................................. 9 5.2 OPENING/CLOSING REPORTS .............................................. 9 5.3 ABORT REPORT ............................................................... 9 5.4 ZONE REST ...

XR6/XR10 Programming Guide TABLE OF CONTENTS Page Section Zone Information 8.1 ZONE INFORMATION ........................................................13 8.2 ZONE NUMBER ...............................................................13 8.3 ZONE NAME ...................................................................13 8.4 ZONE ...

Digital Monitoring Products 1 1 - INTRODUCTION 1.1 Before You Begin About this Guide This guide provides programming information for the DMP XR6/XR10 Command Processor Panel. After this Introduction, the remaining sections describe the functions of each programming menu item along with their available options. Before starting to pr ...

Digital Monitoring Products XR6/XR10 Programming Guide 2 1.3 Programming Menu To select a section for programming, press any top row Select key when the name of that section is displayed on the keypad. The detailed instructions for each programming step are found in the following sections. There are 9 programming menu items to choose from: ...

Digital Monitoring Products 3 1 - INTRODUCTION Select Keys The top row of keys are called the Select keys. When the Programmer displays an option for you to select, such as YES or NO, you press the Select key under the option you want to enable. The Select keys also allow you to change programming information currently in the panel ...

Digital Monitoring Products XR6/XR10 Programming Guide 4 2.1 INITIALIZATION This function allows you to set the panel's user codes and Programmer selections back to factory defaults before programming the panel for the first time or a new installation. After you select YES to clear a section of memory, the panel asks if you are sure you wa ...