DMP Electronics XT Series Programming Manual

XT Series Programming Guide b MODEL XT30/XT50 PROGRAMMING GUIDE When using the XT30/XT50 Series control panel for any listing organization’s approved methods, refer to this manual and the XT30/XT50 Installation Guide (LT-0980). These documents outline the installation and programming requirements of all applications for wh ...

Digital Monitoring Products, Inc. i TABLE OF CONTENTS Introduction........................................................................................... 1 1.1 Before You Begin................................................................................................. 1 1.2 Getting Started................................. ...

XT Series Programming Guide ii TABLE OF CONTENTS Network Options.................................................................................. 11 4.1 Network Options.................................................................................................11 4.2 Wi-Fi Setup.......................................... ...

Digital Monitoring Products, Inc. iii TABLE OF CONTENTS 8.5 Bypass Reports...................................................................................................17 8.6 Code Change Reports..........................................................................................18 8.7 Ambush.............................. ...

XT Series Programming Guide iv TABLE OF CONTENTS 11.14 Burglary Output..................................................................................................25 11.15 Late To Close Output...........................................................................................25 11.16 Arm-Alarm Output............. ...

Digital Monitoring Products, Inc. v TABLE OF CONTENTS 14.15 Entry Delay........................................................................................................35 14.16 Cross Zone.........................................................................................................36 14.17 Priority................ ...

Digital Monitoring Products, Inc. 1 INTRODUCTION Introduction 1.1 Before You Begin Before programming the panel, we recommend you read through the contents of this manual. The information in this document allows you to learn the programming options and operational capabilities of the XT30/XT50 panel. After this Introduction, the r ...

XT Series Programming Guide 2 INTRODUCTION Accessing the Programmer Menu 1. Connect the keypad to the PROG header. 2. If using a Wireless LCD Keypad, make sure panel communication has been established and the user menu appears on an associated keypad before continuing. 3. Install the reset jumper across the two RESET pins ...

Digital Monitoring Products, Inc. 3 INTRODUCTION 1.5 Reset Timeout The XT30/XT50 has a feature that requires you to enter the Programmer menu within 30 minutes of resetting the panel. After 30 minutes, if you attempt to program by entering the 6653 (PROG) code, the keypad displays RESET PANEL. You must reset the panel and enter th ...