GL Sciences PHASER Operation & User’s Manual

Issue 2.0 PHASER Spare Parts Page 18-1 18. PHASER Spare Parts Cat. No. Part Type Quantity 1010-36132 Fused Silica Capillary tube 0.150ID×0.375OD 10M 1 roll 1010-36222 Fused Silica Capillary tube 0.200ID×0.350OD 10M 1 roll 1010-36322 Fused Silica Capillary tube 0.250ID×0.350OD 10M 1 roll 1010-36452 Fused Silica Capillary tube 0.320ID� ...

GL Sciences PHASER Issue 2.0 Pre-installation Page 6-2 2. Place the stabilizers as shown in Fig. 6-22 and secure them with the screws. Fig. 6-2 3. Gently turn the instrument upright and place it on a work bench or a lab table. It is also possible to bolt the stabilizers to the bench using the M6 bolt holes as shown in Fig. 6-3. Fig. 6-3 M6 bolt holes ...

GL Sciences PHASER Issue 2.0 Split Manager Software Page 12-1 12. Nose Guard When using high boiling point samples, its components can condense or become absorbed inside the conventional GC-O nose cone. This leads to a constant background level that disturbs the sniffing process. To get rid of the background the operator often removes the nose cone and c ...

GL Sciences PHASER Issue 2.0 Pre-installation Page 6-1 6. Pre-Installation CAUTION! When installing, operating and maintaining the instrument, carefully follow the procedures described herein. ATTENTION! Install the instrument on a flat, stable surface. Do not dismantle or modify any part of the instrument unless instructed in this manual. 6.1 Installing ...

Issue 2.0 System Overview Page 2-3  SilFlow Splitter PHASER is supplied with the SilFlow deactivated splitter. The splitter installation and column connections are easy and reliable.  Split Ratio calculation software provided as a standard item Split Manager software allows simulation of the setup parameters. By simply typing in t ...

GL Sciences PHASER Issue 2.0 Hardware Page 4-1 4. Hardware The PHASER hardware consists of a bench-top control unit, a heated transfer line and a splitter that are installed on a host gas chromatograph. 4.1 PHASER Controller Front Panel The control unit (Fig. 4.1) contains transfer line temperature controller, auxiliary air flow control, humidified air fl ...

GL Sciences PHASER Issue 2.0 Operating Temperature Control Unit Page 10-1 10. Operating Temperature Control Unit 10.1 Multifunctional Display Fig. 10-1 ① Display Panel Displays actual PHASER transfer line temperature and temperature settings. It can also display the status of the temperature control unit. ② Actual Temperature(red display) Displays act ...

GL Sciences PHASER Issue 2.0 Revision History Page ii Revision History Document Number: G800002 Date Issue Description 17-02-2012 1.0 Initial issue 18-10-2012 1.1 Chapters 7.3 – 7.7 revised 07-02-2014 1.2 CE Declaration of Conformity and company name changed 09-01-2015 1.3 Company name change and some installation part added extra information 14-02-2017 ...

GL Sciences PHASER Issue 2.0 Installation Requirements Page 5-1 5. Installation Requirements Pay attention to the following when installing the instrument:  The instrument is not explosion proof Do not install the instrument in an area where volatile, flammable or corrosive substances, or organic solvents are present. Install the instrument on a flat s ...

Issue 2.0 Preparation Page 9-1 9. Preparation 9.1 Preparing Bubbling Bottle After long periods of sniffing, the nasal mucous membrane can become dry, causing the sense of smell to dull. The bubbling bottle (P/N 275-3070) creates humidified air, which is blown out of the nose cone flange on the PHASER transfer line. This prevents nasal ...