Keybox Basic Operation & User’s Manual

3 Contents I KeyBox Basic model p. 4–15 II KeyBox System model p. 16–29 III KeyBox Expansion model p. 30–31 ...

KeyBox Basic KeyBox basic model. Series with six small key cabinet. Programming and control by means of 12 character keypad. Key compartments are opened with a personal PIN code. All key cabinets can be expanded with cabinets from the KeyBox Extension series. ...

1 General Information 2 Testing 3 Connection of 230 V power cable 4 Wall mounting 5 Codes set on delivery 6 New service code 7 Programming new PIN codes 8 Delete codes 9 Setting magnet time 10 Checking key compartments 11 Resetting 12 Connecting expansion cabinets – Keybox Extension 13 Installing backup battery (Accessory) 14 Quick ...

KeyBox Basic is available with six door. Each door is opened by using a personal PIN code that is entered on the keypad. These codes can only be programmed, altered and removed by the person who has access to the service code. KeyBox Basic can be expanded with our Key- Box Extension series up to 96 doors in the same system! This mak ...

There are four pre-drilled holes for wall mounting. 5. Codes set on delivery KeyBox has no codes on delivery. To programming new codes, enter the service code for entering the service menu. This code is 301042# on delivery from the factory. This code should be changed after instal- lation in order to prevent unauthorised programming This c ...

The example below shows how to program a new service code. Note that it is important to follow the instructions carefully as the new service code is the most important code needed to operate KeyBox. 301042# Enter the service code that applies on delivery. Note that the light now starts flashing at shorter intervals. *99*new service code ...

Programming new PIN codes always requires the service code to be entered in order to access pro- gramming mode. If one or more expansion cabinets are connected the codes are inputted by entering the number of the door counting from the top down for each expansion cabinet. PIN code shall have 1-8 characters. Example of programmi ...

Below is a description of how to remove PIN codes for opening doors. The service code cannot be dele- ted in any circumstances. It can only be changed by inputting a new service code, see chapter 6. The procedure for deleting a particular PIN code is: 301042# Enter the relevant service code. Note that the light now starts flashing at short ...