Intermec EasyCoder E4 Operation & User’s Manual

commitment on the part of Intermec Printer AB. © Copyright Intermec Printer AB, 2002. All rights reserved. Published in Sweden. EasyCoder, EasyLAN, Fingerprint, and LabelShop are registered trademarks of Intermec Technolo- gies Corp. The word Intermec, the Intermec ...

1 Preface Preface Contents.......................................................................................1 FCC Notice (United States of America)......................................3 DOC Notice (Canada) ................................................................3 EU Standard EN 55022 (The Europan Union). ...

2 Preface Contents, cont. 5. Troubleshooting Checklist.....................................................................................36 6. Maintenance Cleaning the Case.......................................................................37 Cleaning the Printhead................................................. ...

3 Preface FCC Notice (United States of America) WARNING This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a Class ...

4 Preface Declaration of Conformity (CE) We, Intermec Printer AB Idrottsvägen 10 Box 123 S-431 22 Mölndal Sweden declare under our sole responsibility1 that the product EasyCoder E4 to which this declaration relates is in conformity with the following standards Electrical Safety: EN 60 950 EMC Emissions: EN 50 081-1 ...

5 Chapter 1 Introduction The EasyCoder E4 printer is a combined thermal transfer and direct thermal printer. It also comes in a LinerLess version, with- out any thermal transfer ribbon mechanism but with special coating on parts in contact with the LinerLess media. It is simple to operate, and is designed to work with ...

6 Chapter 1 Introduction Safety Product Labeling Intermec assumes no responsibility regarding the CE Directive if the printer is handled, modifi ed, or installed in any way other than that described in Intermec’s manuals. Caution • Read this manual carefully before connecting the printer. • Moving parts ...

7 Chapter 2 Before you install the printer, examine the package for possible damage or missing parts: • Open the box and lift the printer out. • Check that the printer has not been visibly damaged during transportation. Keep the packing materials in case you need to move or reship the printer. • Check the ...

8 Chapter 2 Installation Main Parts – Standard Model Transfer Ribbon Rewind Hub Transfer Ribbon Supply Hub Media Supply Roll Post with Edge Guide Thermal Printhead Tear Bar Printhead Lift Lever Label Taken Sensor Guide Shafts Liner Takeup Hub The left side of the case is not designed to be opened by the operator ...