Wise P510 Series Operation & User’s Manual

Misuse of this product might cause damage to the product and serious injury to the user. 1. Do not apply more pressure than given range. 2. Do not use the product with a corrosive fluid. A corrosive fluid can cause the rupture of the measuring elements, and it could ...

5. STRUCTURE AND FUNCTION 6. OPERATING PRINCIPLE 7. CONTACT POINT WORKING TYPE AND CONNECTION 8. HOW TO SET 9. MAINTENANCE AND OPERATION 10. USE 11. INSTALLATION 12. WIRING CONTENTS ...

It is a pressure gauge equipped with a contact block which is located on a type board and it allows every contact combination. On the window, there is a handle for adjusting a set point which has set outside. 2. Applications The product can be used as an in ...

5. Structure and Function ① ② ⑦ ③④ ⑤ ⑥ ⑥ Setpoint Adjustment Dial Cap ⑦ Terminal Box ④ Indicator ⑤ Process Connection ② NO.2 Setting Pointer (NO.2 Setpoint Indicator) ③ Scale Plate NO Description Remark ① NO.1 Setting Pointer (NO.1 Setpoint Indicator) ...

1. Pull Rod 2. Pull Rod Control Point 3. Toothed Segment 4. Segment Opening 5. Spiral Spring 6. Pointer When pressure is applied to the Bourdon Tube, it extends vertically. This vertical movement of Bourdon Tube is delivered to the Movement, and the Movement changes this vertical movement User's Manual Movement is consist of lever and ...

As a dual set point, this provides the combination of two independent single set points metioned above. 4) HIGH & HIHIGH ALARM As a dual set point, this provides the combination of two independent High alarm set points. 5) LOW & LOLOW ALARM As a dual set point, this provides the combination of two independent Low alarm set points. 설정� ...

Set point can be altered by turing the screw inside the gauge. Setting method can be differentiated by its contact type. - HIGH When rising pressure reaches at a set point, the switch status becomes "ON." Adjust the setting pointer from High to Low pressure . - LOW When decreasing pressure reaches at a set point, the switch status becomes "ON ...

removed or controlled easlily. 2) It is required to find out followings before using the gauge. - Pulsation exist? If yes, then use Dampner. - Vibration exist? If yes, then filled the gauge with oil or use oil filled gauge. - Is ambient temper ...