SIGLENT SDG1000X Series Quick Start Manual

SIGLENT TECHNOLOGIES CO., LTD. All rights reserved. Information in this publication replaces all previous corresponding material. SIGLENT reserves the rights to change the specifications and the price. Contents of this manual are not allowed to be copied, extracted, or translated without the permission of Siglent Technologies. Copyr ...

Carefully read the following safety precautions to avoid any personal injuries or damages to the instrument and any product connected to it. To avoid potential hazards, please use the instrument as specified. Any service on this instrument should be performed by qualified repair personnel only. Avoid exposing this instrument to fire. ...

Content Copyright.............................................................. General Safety Summary....................................... Adjust the Handle................................................. The Front Panel.................................................... The Rear Panel.............................................. ...

Adjust the Handle When using the instrument, users can adjust the handle to a desired position for optimum use. Horizontal Position Carrying Position Figure 1 Adjust the Handle ...

1 2 3 11 10 8 9 4 5 6 7 The Front Panel 1. Power Switch 2. USB Host 3. User Interface 4. Numeric Keyboard 5. Knob 6. Arrow Keys 7. CH1/CH2 Control/ Output Port 8. Channel Select Key 9. Function Keys 10. Waveform Option Key 11. Menu Softkeys Figure 2 SDG1000X Front Panel The figure below shows the SDG1000X’s front panel layout: ...

1.Power Switch This switch is used to turn on/off the SDG1000X. When the power switch is off, SDG1000X is in the power off state. 2.USB Host SDG1000X supports U-Disk using FAT format. It is used to read waveforms or state files from a U-Disk or store the current state of the instrument to the U-Disk. Users can update the firmware throu ...

7.Channel Control Area CH1 Control/Output Key The Output key on the left is used to turn on/off CH1 output. The nominal output impedance of the BNC connector is 50 Ω. When pressing Output (the key backlight turns on), the connector outputs the waveform according to the current configuration of CH1. CH2 Control/Output Key The Output ke ...