ParkerBrand PPG-2800 Owner's Manual

product and referenced for operation, maintenance and troubleshooting. This manual contains an overall description of the product, together with all the necessary information for using the product correctly and safely. It is highly recommended that th ...

• ALWAYS position the exhaust outlet away from people. • NEVER use indoors or in a confined space. • READ these safety instructions before using the equipment. • KEEP CHILDREN AWAY FROM THE GENERATOR POSITIONING THE GENERATOR • ALWAYS leave a least a 1M gap between the generator and any ...

FUEL TANK CHOKE LEVER OIL DRAIN PLUG CARBURETTOR 110/230V AC SOCKETS ...

8 9 PRODUCT FEATURES PRODUCT FEATURES EXHAUST OPEN FRAME ENGINE COOLING TIN RECOIL FUEL TAP ENGINE DAMPERS AIR FILTER CONTROL PANEL ...

Inside the box there should be. The Generator, a 110-130V Plug, a 220- 250V Plug and Spark Plug Box Spanner, If any are missing or have been damaged in transit, contact ParkerBrand immediately. BEFORE USING THE GENERATOR • IMPORTANT: Generators should ALWAYS be earthed. Attach a suitable earth lead to a good earth - water pip ...

WHEEL KIT ASSEMBLY (WHERE SUPPLIED) Slide the axle all the way through the housing ensuring that the axle locating pin snaps into position securing the axle to the generator frame. (Repeat these steps for the other axle) AXLE ASSEMBLY Slide the axle into the axle housing located on the frame of the generator. Make su ...

WHEEL KIT ASSEMBLY (WHERE SUPPLIED) With the wheel located on the axle place the washer, locking washer and nut on to the thread. Tighten the nut to secure the wheel in place. (Repeat these steps for the other wheel) WHEEL ASSEMBLY Slide the wheel over the threaded end of the axle. Make sure that the wheel is positio ...

WHEEL KIT ASSEMBLY (WHERE SUPPLIED) Carefully thread the long bolt through the handle assembly and frame. Finally tighten the small nut onto the end of the long bolt securing the handle in place. (Repeat these steps for the other handle) HANDLE ASSEMBLY Line up the handle assembly with the hole at ...

CHECK FUEL LEVEL To add fuel, remove the fuel filler cap Just inside the fuel tank is a fuel tank filter, check this filter periodically and remove any contaminants which may have accumulated. Add fuel to the fuel tank watching the fuel level gauge as you do so. Replace the fuel filler cap securely. We re ...