Satel KNX-SA41 Manual 

Universal Switch Actuator Firmware version 1.01 knx-sa_en 10/19 SATEL sp. z o.o. • ul. Budowlanych 66 • 80-298 Gdańsk • POLAND tel. +48 58 320 94 00 www.satel.eu ...

Prior to installation, please read carefully this manual in order to avoid mistakes that can lead to malfunction or even damage to the equipment. Changes, modifications or repairs not authorized by the manufacturer shall void your rights under the warranty. SATEL aims to continually improve the ...

1 CONTENTS 1. Features ...........................................................................................................................2 2. Description........................................................................................................................3 2.1 Electric diagram of relay outputs........... ...

SATEL The KNX-SA41 / KNX-SA24 module is an universal switch actuator, which makes it possible to control electrical devices (lighting, sirens, ventilation). The module constitutes an interface between the electrical devices and the KNX system. Signals received from various sensors and other control devices are converted, via the modul ...

3 2. Description load circuit terminals for connecting loads (2 terminals per channel). green LEDs indicating the channel state. One channel state LED is assigned to each channel: ON – channel enabled, OFF – channel disabled. buttons to manually change the channel state. One ON/OFF button is assigned to each channel. The ma ...

SATEL Information on what is the number of circuits and relays in the module is contained in the module symbols (KNX-SA41/KNX-SA24). The first digit in the symbol means the number of circuits in the module, and the second – the number of relays per one circuit. 2.2 Enclosure PCB of the KNX SA41 and KNX SA24 modules is mounted in enc ...

5 3. Installation Disconnect power before making any electrical connections. The module is designed for indoor installation, in spaces with normal air humidity, e.g. in distribution boxes on 35 mm DIN rail. 1. Mount the module on mounting rail. 2. Use the connecting terminal to connect KNX bus cable to the module. 3. Connect the l ...

SATEL 4. Configuring the module Working parameters of the module are defined in the ETS program (version 5.5 or higher). The tabs for defining individual parameters are built dynamically. Depending on the selected options, further parameters may be displayed in the tabs or further tabs may be displayed when defining parameters. Moving ...

7 4.2 Configuring global parameters Main operating parameters of the module are defined in the “Global” tab, which is presented below. ...

SATEL Startup delay – time period by which the module startup will be delayed after power-on. Value 00:00:00 will disable the delay. During the delay period the telegram handling is stopped and the channels do not change their state. The module sends no telegrams to the KNX bus. After the delay expires, the telegrams are sent and th ...