Satel CSP-208 Installation And Programming Manual

CSP-204 CSP-208 CSP-104 CSP-108 Installation and Programming Manual Firmware version 1.1 csp-x_i_en 03/18 SATEL sp. z o.o. ul. Budowlanych 66 80-298 Gdańsk POLAND tel. +48 58 320 94 00 www.satel.eu ...

essential requirements of the Regulation of the European Parliament and of the Council (EU) No. 305/2011 and the European Union Directives: EMC 2014/30/EU Electromagnetic Compatibility Directive; LVD 2014/35/EU Low Voltage Directive. An EC Certificate of Conformity No. 1438/CPD/ ...

3. Features.......................................................................................... ...

SATEL 8.2 Description of repeater panels.................................................................................36 8.2.1 Front panel................................................................................................................... 37 8.3 Installation of the repeater panel................ ...

3 1. Introduction This manual covers the following microprocessor based fire alarm control panels: CSP-104 - 4 zone conventional fire alarm control panel, CSP-108 - 8 zone conventional fire alarm control panel, CSP-204 - 4 zone conventional fire alarm control panel with LCD display, CSP-208 - 8 zone conventional fire ...

SATEL  4 (CSP-104 and CSP-204) or 8 (CSP-108 and CSP-208) programmable relay outputs.  LED indicators of the status of fire alarm control panel and external devices.  Built-in sounder.  LCD display (CSP-204 and CSP-208).  Real-time clock with a battery backup.  Alarm log for up to 9999 alarms. � ...

5 Fig. 2. Enclosure interior after removal of cover (by example of CSP-208): - control panel mainboard module. – power supply. – metal insert for battery. Fig. 3. Control panel mainboard module (by example of CSP-208): – RS-232 port. - front panel. – location of slot for an insert with zone descriptions ...

SATEL 4.1 Terminals - protection terminal. AUX - dedicated output for power supply of CSP-ETH module (two terminals with indicated polarity). 24 V - power output 24 V (two terminals with indicated polarity). FIRE TX - fire alarm routing output (two terminals with indicated polarity). FLT TX - fault warning routi ...

7 Fig. 5. CSP-204 control panel's front panel. Fig. 6. CSP-108 control panel's front panel. ...

SATEL Fig. 7. CSP-104 control panel's front panel. 4.2.1 LED indicators LED Description Color Indications fault yellow ON – fault blinking – fault memory test yellow blinking – test function is activated ON – test of zones, sounders, fire alarm routing output or fault warning routing output is running dis ...