Record Power Coronet Series Original Instruction Manual

Coronet Regent 18" Heavy-Duty Swivel-Head Cast Iron Variable Speed Lathe Original Instruction Manual Important For your safety read instructions carefully before assembling or using this product. Save this manual for future reference. Always wear safety glasses when using woodworking e ...

2 General Health and Safety Guidance 3 Additional Health and Safety Guidance for Woodturning Lathes 4 Record Power Guarantee 5 Specifications 6 Contents of the Package 7 Getting to Know Your Lathe 8 Assembly 9 Assembly of the Optional Bed Extension 10 Assembly of the Optional Outrigger 11 Operation 12 Maintenance 13 Intend ...

Please ensure that you take the appropriate action wherever the warnings are used. 1. Explanation of Symbols i i i ii ii i Kg Mandatory Instructions Warnings Read and fully understand the instruction manual before attempting to use the machine. Indicates an instruction that requ ...

Ensure that you carefully read and fully understand the instructions in this manual before assembly, installation and use of this product. Keep these instructions in a safe place for future reference. WARNING: for your own safety, do not attempt to operate this machine until it is completely assembled and installed acc ...

• If the work area is to be left unattended, all machinery should be switched ‘OFF’ and isolated from the mains power supply. 13. Store machines safely when not in use • When not in use, machines should be stored in a dry place, out of reach of children. Do not allow persons unfamiliar with these instructions ...

Woodturning Lathes Safe Operation Familiarise yourself with the machine • Machining operations using wood turning lathes have a history of serious accidents. Most serious accidents resulted from the work piece being thrown from the lathe whilst turning. Other accidents can be caused by loose clothing being dr ...

“Products” means the Products sold by Record Power subject to these terms and conditions; “Record Power” is Record Power Limited, whose company registration number is 4804158 and registered office address is Centenary House, 11 Midland Way, Barlborough Links, Chesterfield, Derbyshire S43 4XA and sells through a network of ...

Frequency: 50 Hz Motor input P1: 2 kW Motor output P2: 1.5 kW Motor speed: 1400 rpm Full load current: 6 A Max. bowl diameter: 1000 mm (39”) Max. between centres: 610 mm (24”) Max. swing over bed: 460 mm (18”) Spindle speeds: 250 - 3800 rpm Taper: 2 Morse Taper Spindle Thread: M33 x 3.5 Quill travel: 90 mm Size: W1450 x D540 x H1215 mm ...

1. Carefully lift the lathe from the carton and check that all of the components and contents have been included. Place parts on a protected surface. 2. Clean all rust protected surfaces with white spirit. Do not use gasoline, paint thinner, mineral spirits, etc. These may damage p ...

in the OFF position until the machine is assembled. The lathe is heavy and must be assembled by two people. Before mounting the lathe to the legs the tailstock, tool rest holder and headstock must be removed. Remove the end stop screws shown in Fig 8.1 using an 8 mm hex wrench. These a ...