alfen E-Socket Quick Installation Manual

Package contents 4 Connecting the E-socket 5 Assembling the E-Socket for mounting on the right side 6 Assembling the E-Socket for mounting on the left side 8 Installing the E-Socket on the Eve Single Pro-line FR 10 Installing the E-Socket on the Eve Double Pro-line FR 11 Appendix: Single line diagram 23 3 ...

for the E-Socket. Please always refer to our website for the most up-to-date and complete manual for the product.www.alfen.com/en/ downloads. The installation must comply with standards and (local) regulations and must only be carried out by a qualified technician. The electrical system must be disconnected fr ...

Connecting the E-Socket to the Eve Double Pro-line FR The E-Socket on the Eve Double Pro-line FR A total of two E-Sockets can be installed on the Eve Double Pro-line FR. 1 Determine the position of the E-Socket(s): • Left and/or • Right. The E-Socket cannot be mounted on the Eve Double Pro-line FR. Do not leave the E-Socket hanging. Use ...

mounting on the right side Preparing for installation 1 Orientate the Junction box with the opening facing to the right. Do not damage the power cables and wires. 2 Insert the cable gland at the top of the junction box and fit the locknut. Do not tighten. 3 Insert the filler plug at the bottom of the junction box and fit and tight ...

5 Connect wires 1, 2, 3 and 4 to the Fuse holder and Relay in the junction box according to the wiring diagram (Page 23). The wires are number coded. • Connect wire 1 to the Fuse holder. • Connect wire 2 to position 4 on the Relay. • Connect wire 3 to position A1 on the Relay. • Connect wire 4 to position A2 on the Relay. 6 Feed wir ...

mounting on the left side Preparing for installation 1 Orientate the Junction box with the opening facing to the left. Do not damage the power cables and wires. 2 Insert the cable gland at the top of the junction box and fit the locknut. Do not tighten. 3 Insert the filler plug at the bottom of the junction box and fit and tighten ...

5 Connect wires 1, 2, 3 and 4 to the Fuse holder and Relay in the junction box according to the wiring diagram (Page 23). The wires are number coded. • Connect wire 1 to the Fuse holder. • Connect wire 2 to position 4 on the Relay. • Connect wire 3 to position A1 on the Relay. • Connect wire 4 to position A2 on the Relay. 6 Feed wir ...

Single Pro-line FR These installation instructions are solely applicable for installing the E-Socket on the Eve Single Pro-line FR. When installing the Eve Single Pro-line FR for the first time follow the instructions described in the quick installation guide delivered with the product. 1 Remove the front cover. • Unscrew ...