Code Soft TCM-8815 Operation & User’s Manual

All Rights Reserved Manual Version 1.1 Part Number: 3LMPP1300111 The information contained in this document is subject to change without notice. We make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. We shall not be li ...

1. To disconnect the machine from the electrical Power Supply, turn off the power switch and remove the power cord plug from the wall socket. The wall socket must be easily accessible and in close proximity to the machine. 2. Read these instructions carefully. Save these instructions for future reference. 3. Follow all wa ...

There is a danger of explosion if the battery is replaced incorrectly. Replace only with the same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturer’s instructions. LEGISLATION AND WEEE SYMBOL 2002/96/EC Waste Electrical and Electronic Equipment Directive on the treatment, c ...

Revision Date Description V1.0 Mar. 2010  Release V1.1 Aug. 2010  MB version change  Add Fingerprint Scanner to optional items ...

1-1 Standard Items ..................................................................... 1 1-2 Optional Items ...................................................................... 2 2 System View............................................. 3 2-1 Front View ............................. ...

Take the system unit out of the carton. Remove the unit from the carton by holding it by the foam inserts. The following contents should be found in the carton: 1-1 Standard Items a. d. b. e. c. f. a. Monitor b. Driver CD c. Power Adapter (36W) d. Power Cable e. USB Cable for touch f. VGA Cable 1 ...

a. c. b. d. a. MSR Module b. VFD Module c. Wall Mount Kit d. Fingerprint (either choose W/MSR module) 2 ...

2-1 Front View System Overview table -1 Number Component 1 Touch Screen 2 MSR (Optional) 3 OSD Button for OSD menu selection From left to right button: 4 Stand Hole for cable management 3 ...

System Overview table -2 Number Component 5 VFD Module (Optional) 6 Stand (with cable management and power adapter bracket) 7 Cable Outlet 8 VFD Cover (VFD module installation location) 9 VESA hole for stand and wall-mount kit installation 4 ...