D-Link DCS-5020L Technical Support Setup Procedure

Page | 1 How to: Change the SSID and Enable to WEP Encryption. Step 1: Connect the power of the camera and connect LAN cable from the camera to your router. Step 2: Run the CD that come with the camera on your computer. Step 3: Click on next Step 4: Put a tick in the box beside ‘I accept these terms and conditions.’ ...

Page | 3 Step 7: Click on Next Step 8: Click on Next Step 9: Click on Yes. ...

Page | 4 Step 10: Copy down the IP address of the DCS-5020L show in the list. Step 11: Open Internet Explorer and enter the IP address of the camera that you had copy down on the URL bar. Step 12: Enter the camera user name and password that had set during setting up of the camera. Click on OK. Step 13: Click on Setup > Wire ...

Page | 5 Step 14: Tick on the Enable Wireless. Click on Site survey. Step 15: Select the Wi-Fi network name you want to connect to Step 16: Under Wireless Configuration. a) Select Shared for Authentication b) Select WEP for Encryption c) Select 1 for Default Key d) Enter the wireless password used on your AP or Wireless Rout ...