K-array K-CTRL Operation & User’s Manual

6 4. SYMBOLS 6 5. WARRANTY 7 6. GENERAL WARNINGS 7 7. SAFETY INSTRUCTION 7 8. VOLTAGE REQUIREMENTS 9 9. OPERATION 9 � 9.1 “A” MODE (auto) 9 FRONT PANEL 9 BACK PANEL 9 9.2 “C” Colour Mode 11 9.3 “SLA” DMX Slave Mode 11 9.4 “d” DMX Mode 12 9.5 “P” DMX Preset Mode ...

power supply works as the power supply and DMX function controller for the LED component of the K-Array KTL22 series of combined Speaker/Lighting fi xtures. Colourmix, intensity and program operation mode can all be preset. The K-CTRL can also operate using an internal microphone fo ...

1 pcs. mains cable 1 pcs. operation manual ACCESSORIES PARTS: 1 pcs. Mounting cover 2 pcs. Mounting screw 1 pcs. connection cable to panel This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literatur ...

craftsmanship as determined by the distributor. During the warranty period K-array will, at it’s discretion, either repair or replace products which prove to be defective provided that the product is returned in its origin ...

and dry cloth only for cleaning. Check all connection cables before reconnecting the unit. • Where the mains plug or an appliance coupler is used as a dis-connect device, the disconnect device shall remain readily operable. • Choose the position of the AC cord according to the lowest risk of dam ...

discontinuity if the AC voltage stays within a operating window from 90 V to 260 V. Check the voltage before connecting the amplifi er to the AC power. A higher voltage could seriously damage the ...

knob (1) controls the speed or selects the sound-activated function (refer to pattern list below). The sound-activated function can be activated by setting the knob (1) inside the first 10 degrees of its travel from left detent. In this setting it works from a built-in microphone (8) which picks up ...