Duncan Renovator AS3000 Owner's Manual

Hilton Highway, Washdyke Timaru, New Zealand Telephone (03) 688 2029 Facsimile (03) 688 2821 Australian Branch: 4B Silverton Close Laverton North 3026 Melbourne, Australia Telephone (03) 9314-9666 Facsimile (03) 9314-6810 AS3000/AS3500/DD30 ‘Electric Drive Operation’ ORIGINAL INSTRUCTIONS Pt. No. 67405 Issue 111 ...

Issue 1113 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Acquisition & Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Description of Machine Working Principle. . . . . ...

On delivery of your new Duncan Renovator AS3000/3500 please check that the machine is not damaged. In cases of shipping damage, please ask your dealer to arrange for the appropriate claim to be lodged immediately. Assemble any parts supplied loose and inspect your machine with the aid of this manual to familiarise yourse ...

Issue 1113 Description of Machine The Duncan ‘Renovator AS3000/3500’ is a Coil Tine T- boot drill. The large split hopper is mounted on a robust frame accommodating large diameter tyres. Sowing depth is controlled by adjusting the hydraulic ram as required. The quality European air metering units handle all seeds from turnip and rape thro ...

Components Referred to in the Pre-Calibration Setup and Calibration Process The following pages describe how to set the machine up for calibration, the calibration process and subsequent adjustments to obtain the desired seed and/or fertilizer output. Terms and words used in those instructions are shown bel ...

Issue 1113 ‘IDLER GEAR’ HIGH = PUSHED IN LOW= PULLED OUT Adjustment Handle Normal/Fine Toggle high (idler in) low (idler out) Venturi Housing with Trap Door for calibration & gate for controlled emptying of the bin Components Referred to in the Pre-Calibration Setup and Calibration Process The following pages describe how to set the machi ...

Components Referred to in the Pre-Calibration Setup and Calibration Process The following pages describe how to set the machine up for calibration, the calibration process and subsequent adjustments to obtain the desired seed and/or fertilizer output. Terms and words used in those instructions are shown bel ...

Issue 1113 ‘Renovator AS3000/3500’ Read Before Operation Components Referred to in the Pre-Calibration Setup and Calibration Process The following pages describe how to set the machine up for calibration, the calibration process and subsequent adjustments to obtain the desired seed and/or fertilizer output. Terms and words used in those i ...