Altec SI-MAX Series Installation Manuallines

Output voltage on +BAT: 13.8 Vdc (+/- 0.2 Vdc) Residual ripple allowed: 250 mV Consumption without alarm on battery: 5 mA Consumption with alarm on battery: 1.6 A Control voltage (+BL) : 9 to 16 Vdc (0.1 mA) Triggering voltage: below 4 Vdc Reset triggering : more than 9 Vdc Level sound at 1 m. : ...

the front acts directly on the switch of the tamper against forced opening. Important: Verify the proper operation after installation by unscrewing the screw. 3- Position to the screw of tamper against forced opening 2- Internal battery 12 VDC – 2 Ah 4- Supply voltage (limited to 100mA) 12 to 14.5 Vdc ...

1- Top of the box 2- Mounting holes (X4) 3- Electronic Card SIMAX 4- Running cables 5- Battery 12V_2Ah IMPORTANT : Periodically check the battery status and the terminals tightening 6- Position of the screw for the auto-protection against forced opening IMPORTANT : The screw must be screwed into the wall until its head comes in ...