Circutor CDP series Application Notes

ATTENTION Indicates that special attention should be paid to a specifi c point. Follow the warnings described in this manual with the symbols shown below. If you must handle the unit for its installation, start-up or maintenance, the ...

...

Date Revision Description 10/14 M028E0401-03-14A Original version 09/19 M028E0401-03-19A Change in the following sections: 1. - 2.1. - 2.2. - 2.2.2. - 3. Note: The images of the units are solely for the purpose of illustration and may differ from the original unit. SYMBOLS Table 2:Symbols. Sym ...

troller, specifically they are:  PIKO IQ 4�2-10  PIKO 10-20  PIKO 36 EPC For the CDP controller to be able to correctly manage the inverter, communication between the two devices must be correct and both products mus ...

The CDP and the inverter communicate via an RS-485 bus. This RS-485 bus can connect up to 32 inverters, although the number of inverters in the vast majority of domestic installations ranges from 1 to 3. 2.1.- COMMUNICATION CABLE To communicate with a KOSTAL PIKO inverter using a CDP, the inverter must be ...

Figure 2 shows the connection between the CDP and a single inverter. Figure 2:Connection between a CDP and a single inverter. 2�1�2� CONNECTION OF SEVERAL INVERTERS Figure 3 shows the connection between the CDP and several inverters. Figure 3:Connection between a CDP and several inverters. ...

Figure 4:PIKO 3.0/3.6/4.2/5.5 screen (with type I communications card) Figure 5:PIKO 7.0/8.3/10.1/10/12/15/17/20 screen (with type II communications card ) Programming the inverter on the web server is recommended, given that it streamlines the pr ...

The KOSTAL inverter is equipped with a web server that can be accessed using the IP address shown on the display of the unit. To view the IP address, follow the instructions below: 1�- Press the button in the main menu until the inverter icon appears shad ...