APS LSC Installation & User Manual

Installation:............................................................................................................................3 Fitting:.................................................................................. ...

Before commissioning the LSC Annunciator System please read the following notes for your safety and for the operating safety of the equipment. Installation: Installation work must be carried out by certified technical staff only. Follow the instructions in this handbook, and heed the notes on dangers. Observe the locally applica ...

in accordance with DIN 19235: o Building services and building automation o Control systems o Process automation o Power transmission, power distribution o Transport o Communication On-Delay: Individually On-delay setting for all in- and outputs up to 47 minutes Seria ...

the check list for installation/fault finding. Before switching on the voltage supply and the supply for the inputs and outputs you must ensure that the voltage values are within the permissible limits (see Technical Data). Voltage which is too high ...

LSC Warning: If you are using a single Basic Module BM the address has to be set to the stand alone mode (all LED are blinking) which is factory setting. Otherwise, a bus error will occur. Important: If you are in the module ID address setting process and do not press any button for six seconds, the module will switch back to operation mo ...

o Turn of the supply voltage. o Press and hold the lamp test button, then turn on the supply voltage o Let go the lamp test button and press it again for three seconds to acknowledge. Button lamp test CAN-Bus: In case of a bus error, the two LED „Bus“ and „Ho ...

Checkpoint Module Connectors Installation Check Supply voltage Power supply Alarm voltage Power supply BM 1/2 Supply voltage (connection) RM 1/2 First Switch ON 1 Termination resistor Last Switch ON 1 Alarm inputs + BM 8-15 Alarm inputs - BM 7 Horn acknowledgement + BM 4 Horn acknowledgement - BM 3 Lamp acknowledgement + BM 5 La ...

Application & Characteristics The BM Basic Module is the foundation stone of the modularly expandable LSC product family. The BM Basic Module is supplied in the installation housing for top-hat rail mounting. o 8 operation indicator o Integrated buzzer o 8 alarm inputs NO/NC with individual time delay o 3 system inputs and outputs o CA ...