DAPAudio EDGE ED-1 Manual 

Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands Order code: D1485 MANUAL ENGLISH ...

EDGE ED-1 Table of contents Warning ............................................................................................................................................................................... 2 Safety Instructions .......................................................................................................... ...

EDGE ED-1 Warning Unpacking Instructions Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure that all parts are present, and have been received in good condition. Notify the dealer immediately and retain packing material for inspection if any parts appear damaged from shipping or the carto ...

EDGE ED-1 IMPORTANT: The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorized modification to the device. Before using the device, check the regulations regarding the frequency allocation in your country or region. ● Never use the device during thunderstorms, u ...

EDGE ED-1 Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility. Call Hi ...

EDGE ED-1 Description of the Device The EDGE ED-1 is an antenna distributor that can be used with the EDGE wireless handheld system. The EDGE is suitable for voice transmission. Features ● Power supply: DC 12 V, 5 A ● Power consumption: 200 mA ● Maximum power consumption: 2 A ● Through ANT RF IN A/ANT RF IN B power to antenna dist ...

EDGE ED-1 Back Fig. 02 02) A1–A4, BNC connector OUT Use these connectors to connect the EDGE EHS-1 receivers. Each high-frequency output can supply power to the receiver. 03) RF A, BNC connector OUT Use this connector to connect another ED-1, in order to create 8-channel diversity high-frequency output. 04) Antenna A connector IN 05) Po ...

EDGE ED-1 Installation Remove all packing materials from the EDGE ED-1. Check if all foam and plastic padding is removed. Secure the equipment into a 19" rack if preferred. Connect the device to a power outlet with the supplied DC power adapter. Connect all cables. Always disconnect from electric mains power supply before cleaning or serv ...

EDGE ED-1 2 x EDGE ED-1 Fig. 06 Setup and Operation Follow the directions below, as they pertain to your preferred operation mode. Before using the device, check the regulations regarding the frequency allocation in your country or region. Before plugging the unit in, always make sure that the power supply matches the product specificatio ...