ADLINK Technology COM Express Express-CFR Operation & User’s Manual

Status Code Description 0x35 CPU post-memory initialization. Boot Strap Processor (BSP) selection 0x36 CPU post-memory initialization. System Management Mode (SMM) initialization 0x37 Post-Memory North Bridge initialization is started 0x38 Post-Memory North Bridge initialization (North Bridge module specific) 0x39 Post-Memor ...

ADLINK Technology COM Express Express-CFR Feature Options Description PEG Port Configuration Info only PEG 0:1:0 Read only Enable Root Port Disabled Enabled Auto Enable or Disable the Root Port Max Link Speed Auto Gen1 Gen2 Gen3 Configure PEG 0:1:0 Max Speed PEG0 Slot Power Limit Value 75 Sets the upper limit o ...

ADLINK Technology COM Express Express-CFR 39 4.6. Switch Settings Switch Locations PCI Express Configuration Switch BIOS Select and Mode Configuration Switch Figure 5: Express-CFR Switch Locations 4.6.1. PCI Express Configuration Switch. PCI Express Configuration Switch (also referred to as the PEG config. switch) allows you to configure the PCI Express x16 la ...

ADLINK Technology COM Express Express-CFR 15 3.3.4. eDP Note: eDP is supported by build option, in place of LVDS. Signal Pin # Description I/O PU/PD Comment eDP_TX3+ eDP_TX3- eDP_TX2+ eDP_TX2- eDP_TX1+ eDP_TX1- eDP_TX0+ eDP_TX0- A81 A82 A71 A72 A73 A74 A75 A76 eDP differential pairs O PCIE AC coupled off module eDP_VDD_EN A77 eDP power enable O 3.3V eDP_BK ...

ADLINK Technology COM Express Express-CFR Submenu NCT5104D Super IO Configuration Info only Serial Port 1 Configuration Submenu Serial Port 2 Configuration Submenu NCT5104DSEC Super IO Configuration Info only 7.3.9.1. W83627DHGSEC Super IO Configuration > Serial Port 1 Configuration Feature Options Description Serial P ...

ADLINK Technology COM Express Express-CFR 3.4.5. PCI Express Graphics x16 (PEG) Signal Pin Description I/O PU/PD Comment PEG_RX0+ PEG_RX0- PEG_RX1+ PEG_RX1- PEG_RX2+ PEG_RX2- PEG_RX3+ PEG_RX3- PEG_RX4+ PEG_RX4- PEG_RX5+ PEG_RX5- PEG_RX6+ PEG_RX6- PEG_RX7+ PEG_RX7- PEG_RX8+ PEG_RX8- PEG_RX9+ PEG_RX9- PEG_RX10+ PEG_RX10- PEG_RX11+ PEG_RX11- PEG_RX12+ PEG_RX12- PEG_RX ...

ADLINK Technology COM Express Express-CFR 43 5. Smart Embedded Management Agent (SEMA) The onboard microcontroller (BMC) implements power sequencing and Smart Embedded Management Agent (SEMA) functionality. The microcontroller communicates via the System Management Bus with the CPU/chipset. The following functions are implemented: ‧ Total operatin ...

ADLINK Technology COM Express Express-CFR Feature Options Description Graphics Configuration Info only Skip Scaning of External Gfx Card Disabled Enabled If Enable, it will not scan for External Gfx Card on PEG and PCH PCIE Ports Primary Display Auto IGFX PEG PCIe Select which of IGFX/PEG/PCI Graphi ...

ADLINK Technology COM Express Express-CFR 7.1. Menu Structure This section presents the six primary menus of the BIOS Setup Utility. Use the following table as a quick reference for the contents of the BIOS Setup Utility. The subsections in this section describe the Submenus and setting options for each menu item. The default setting options are presented in b ...

ADLINK Technology COM Express Express-CFR 31 3.4.6. Module Type Definition Signal Pin # Description I/O Comment TYPE0# TYPE1# TYPE2# C54 C57 D57 The TYPE pins indicate to the Carrier Board the Pin-out Type that is implemented on the module. The pins are tied on the module to either ground (GND) or are no-connects (NC). For Pinout Type 1, these pins are don ...

Feature Options Description Memory Configuration Info only Maximum Memory Frequency Auto 1067 1200 1333 1400 1600 1800 1867 2000 2133 2200 2400 2600 2667 2800 2933 3000 3200 3400 3467 3600 3733 3800 4000 4200 4267 4400 4533 4600 4800 5000 5067 5200 5333 5400 5600 5800 586 ...