Record Power DML305-VS Instruction Manual

DML305-VS Cast Iron Electronic Variable Speed Midi Lathe Important For your safety read instructions carefully before assembling or using this product. Save this manual for future reference. Always wear safety glasses when using woodworking equipment. Always read the instructions provided before using woodworking equipment. i Kg V ...

2 General Health & Safety Guidance 3 Additional Health & Safety Guidance for Woodturning Lathes 4 Record Power Guarantee 5 Machine Description & Technical Specifications 6 Assembly 7 Adjustment 8 Operation 9 Intended Use of the Lathe & Basic Woodturning Instructions 10 Dust Extraction 11 Electrical Connection & Wiring Diag ...

may be used throughout this manual. Please ensure that you take the appropriate action wherever the warnings are used. 1. Explanation of Symbols i i Kg i i Kg i Kg ii i Kg Mandatory Instructions Warnings Read and fully understand the instruction manual before attempting to use the machine. Indicates an instruction ...

Ensure that you carefully read and fully understand the instructions in this manual before assembly, installation and use of this product. Keep these instructions in a safe place for future reference. WARNING: for your own safety, do not attempt to operate this machine until it is completely assembled and installed accor ...

of children. Do not allow persons unfamiliar with these instructions or with the machine to operate it. 14. Do not overreach • Choose a working position that allows your body to remain balanced and feed the work piece in to the machine without overreaching. • Keep proper footing and balance at all times. 15. Electri ...

Safe Operation Familiarise yourself with the machine • Machining operations using wood turning lathes have a history of serious accidents. Most serious accidents resulted from the work piece being thrown from the lathe whilst turning. Other accidents can be caused by loose clothing being drawn in to t ...

“Products” means the Products sold by Record Power subject to these terms and conditions; “Record Power” is Record Power Limited, whose company registration number is 4804158 and registered office address is Unit B, Ireland Industrial Estate, Adelphi Way, Staveley, Chesterfield, S43 3LS and sells through a network of Autho ...

MACHINE IDENTIFICATION There is a plastic identification plate fixed to the machine, containing the specifications and serial number. GETTING TO KNOW YOUR MACHINE 1 Lifting handle 2 Handwheel 3 Face plate 4 4 prong drive centre 5 Tool rest 6 Revolving centre 7 Tailstock 8 Tailstock handwheel 9 Tailstock spi ...

Loosen locking arm and insert tool rest into tool rest base, adjust height as required and tighten the locking arm. Fig.6.1. Locking arm Tool rest Tool rest base Fig.6.1 Fitting the 4-Prong Drive to the Headstock Insert the drive centre, with a No.1 Morse Taper shank, into the headstock spindle. Fig.6.2. ...

1 Upright plinth x 2 2 Male cross brace 3 Female cross brace 4 M10 x 25mm set screw x 2 5 M8 x 35mm bolt x 2 6 M10 x 80mm bolt x 12 7 Upright column x 2 8 Base x 2 2 3 7 8 1 4 5 6 6. Assembly - Optional Leg Stand DML305-VS Manual 3.0.indd 10 19/09/2013 11:13 ...