Mitsubishi Electric 800 Series Instruction Manual

POWER SUPPLY 3 FR-E8DS E KIT 24 VDC input ...

This Instruction Manual provides handling information and precautions for use of this product. Incorrect handling might cause an unexpected fault. Before using this product, read all relevant instruction manuals carefully to ensure proper use. Please forward this I ...

 Additional Instructions The following instructions must be also followed. If the product is handled incorrectly, it may cause unexpected fault, an injury, or an electric shock. CAUTION  The voltage applied to each terminal must be as specified in the Instruction Manual. Otherwise an explosion or damage may occur.  The cables ...

are properly installed prior to starting operation. ...

Safety instructions 2 1 PRE-OPERATION INSTRUCTIONS 6 1.1 Unpacking and checking the product............................................................................................................................6 1.1.1 Product confirmation ................................................................................................. ...

Take the plug-in option out of the package, check the product name, and confirm that the product is as you ordered and intact. This product is a plug-in option made for the FR-E800 series inverters. 1.1.1 Product confirmation Check the enclosed items. Plug-in opt ...

The FR-E8DS is available for the inverters manufactured in December 2021 or later. Check the SERIAL number printed on the rating plate or on the package of the inverter. NOTE • When the FR-E8DS is installed to an incompatible inverter, operation cannot be guaranteed. The SERIAL consists of two symbo ...

or a spacer. 10 b Terminal block Connected to a 24 V external power supply. 18 c Board mounted option connector Used to connect this product to the option connector of the inverter. 10 d ...

1.3.2 Availability of the inverter functions while the 24 V external power is supplied *1 Terminal FM is provided in the FM type inverter. Terminal AM is provided in the AM type inverter. *2 For details, refer to the FR-E800 Instruction Manual (Function). NOTE • During t ...

2.2 Installation procedure  Installing the option The FR-E800 series inverter has only one plug-in option connector. NOTE • Ensure the control circuit terminals are wired before installing the plug-in option ...