DigiTech DF7 Owner's Manual

This output has been specifically designed for use with a full range audio system. It is designed to be plugged directly into a mixer or recording device for optimal performance. Each MODEL features a specific cabinet model when using this output. (See Flexible Output Mode and Stereo Spectrum Set-up sections.) Distortion Model Descriptions ...

DigiTech DF7 the 12 O’Clock position to accurately reproduce this pedal model. When this model is selected, the CIT cabinet model used in Flexible Output Modes 1 and 2 is based on a Fender®* Bassman®* 2x12 cabinet. DISTORTION MODEL 5 Based on the Boss® MT-2 Metal Zone®* This model recreates the over-the-top distortion of the Boss MT-2 ...

DigiTech DF7 (ONE FLASH) Power Supply (optional) Changes made to Flexible Output Mode and Stereo Spectrum are saved even after the DF-7 is turned off. Mode One does not utilize Stereo Spectrum. ...

1. Press and hold the pedal switch. 2. Insert a 1/4" guitar cable into the input.The LED will light solid for approximately one second and then turn off. 3. While holding the pedal switch, wait for the Indicator LED to flash three times. 4. Release the pedal switch. (Continuing to hold the pedal switch will cycle through one, two, and thre ...

DigiTech DF7 regarding each model and the Stereo Spectrum Set-up section for spectrum selection. 9. INPUT Connect your instrument to this jack. Connecting a guitar cable to this jack supplies battery power even though the Indicator LED may not be lit. (See Flexible Output Mode™ section.) To prolong battery life, disconnect all cable ...

DigiTech DF7 1. Press and hold the pedal switch. 2. Insert a 1/4" guitar cable into the input.The LED will light solid for approximately one second and then turn off. 3. While holding the pedal switch, wait for the Indicator LED to flash once. 4. Release the pedal switch. (Continuing to hold the pedal switch will cycle through one, two, and three flash ...

DigiTech DF7 and configured for stereo use with two mixer/recorder channels. Mode Two: Dual Mixer Out - Stereo (TWO FLASHES) ...

DigiTech DF7 Sandy, Utah 84070 PH (801) 566-8800 FAX (801) 566-7005 www.digitech.com Manufactured in the USA Printed 2/2005 DF-7 Distortion Factory™Owner’s Manual 18-1843-A DigiTech®, DOD®, DF-7 Distortion Factory™, Flexible Output Mode™and CIT™ are trademarks of Harman International Industries Incorporated. *Other product ...

DigiTech DF7 In addition to having the two stereo output modes (Mode 2 and Mode 3), the DF-7 also has six different stereo spectrums to choose from when using Mode 2 or Mode 3.To activate the stereo spectrums, follow the steps in the Stereo Spectrum Setup sec- tion and choose a stereo spectrum with the DISTORTION MODEL knob. Note: The DF-7 must ...

DigiTech DF7 Distortion Factory™Pedal. Distortion pedals are as important to the world of guitar playing as guitar playing is to modern music, and the DigiTech DF-7 Distortion Factory is the most advanced distortion pedal ever created.We’ve modeled seven of the most popular distortion stompbo ...

DigiTech DF7 We modeled the Metal Master with its Morph knob set to the minimum position.This model gives you a sweet singing solo tone with plenty of midrange to cut through any mix and beautifully controllable feedback for hanging on to those key notes. For this model, the DF-7’s LEVEL, LOW, and HIGH knobs function like the Metal ...

DigiTech DF7 equipped with a single INPUT and a highly powerful set of outputs that can be connected to both an amplifier OUT 1 (AMP) and a mixer OUT 2 (MIXER) simultaneously or configured so both OUTs can be connected to two mixer channels (Mode 2 stereo) or to two amps (Mode 3 stereo). Flexible Output Mode LED OUT 1 OUT 2 Mo ...