Meari Snap 6S Manual 

What's in the box Bracket(B) USB cable Snap 6S Power adapter Screws(2 kinds)x2 Manual Bracket(A) ...

Red light solids on: the camera network is abnormal Red light blinks: awaiting WiFi connection, or currently connecting (faster blinking) Blue light solids on: camera running correctly Support local SD Card storage (Max.128G) Press and hold ...

Mode 2 Bracket (B) Installation 2.Install the camera in the bracket and lock it with the screw 1.Fix the bracket on the wall 1.Fix the bracket on the wall with screws 2.Bring the camera closer to the bracket 0~90° 0~360° After ajusting your camera angle, please lock this screw ...

Life'in App Store or Android Market, or scan the QR-Code to download the App. Set up router The router supports the 2.4GHz WiFi (doesn't support the 5GHz).Before connecting to the WiFi network,please set the parameters of the router, and record the SSID and password of you ...

and click "Agree" . Step 2 Input a legal and valid Mobile number or Email address and click "Continue". Input Verification Code, then log in the app. Connect ...

Open the Smart Life App, click "Create family", and you can customize the Family name and related settings . 1 Continue to click "Security & Sensor" >> "Smart Camera",and then choose"Add Device" or "+",ready to add camera. 2 ...

In "Add Device" this interface,continue to click "next step",and then you should input your WiFi's passwords. 3 Note: 1) Camera only supports 2.4GHz WiFi network. 2) The number of bits in the ssid and passwords of the router should not exceed 24 digits. ...

In this interface,you should scan the QR code in your phone with the camera,when the camera comes out "dong dong dong". And you can complete the configuration about 30s. 4 ...

When connecting,you should make sure your router,mobile,and camera are as close as possible.When camera added successffully,click " " you could also DIY the camera's name. 5 ...