Amit IDG400-0TE0C Operation & User’s Manual

The following product information is required to be presented in product User Manual for latest CE RED requirements. 1 (1) Frequency Band & Maximum Power 1.a Frequency Band for Cellular Connection (for EC25-EU version) Band number Operating Frequency Max output power LTE FDD BAND 1 Uplink: 1 ...

Amit IDG400-0TE0C 1.2.1 Package Contents #Standard Package Items Description Contents Quantity 1 IDG400-0TE01 4G Modem 1pcs 2 Cellular Antenna 2pcs MicroUSB Cable 1pcs 4 RJ45 Cable 1pcs #Optional Package Items Description Contents Quantity 1 Extender 1pcs or 2 pcs (1 pcs needed for din-rail and 2 pcs needed for wall-mount) 2 DIN-Rail Bracket 1pcs ...

Amit IDG400-0TE0C package.  Over voltage rating is dangerous and may damage the product.  Do not open or repair the case yourself. If the product is too hot, turn off the power immediately and have it repaired at a qualified service center.  Place the product on a stable surface and avoid usin ...

Amit IDG400-0TE0C CAUTION: The surface temperature for the metallic enclosure can be very high! Especially after operating for a long time, installed at a closed cabinet without air conditioning support, or in a high ambient temperature space. DO NOT touch the hot surface while servicing!! ...

The IDG400 series connect to a machine via giga ethernet interface for 3G/4G network connection. IDG400 series also provides another function with NAT router. It can help the network application more flexible. 2.1 Network Network Page Item Description Device Mode Set the unit operating mode Cellular Set the parameter for cellular ...

Amit IDG400-0TE0C This chapter describes how to install and configure the hardware 1.6.1 Mount the Unit The IDG400 series can be placed on a desktop, or use extender to place on DIN-Rail bracket or mount on the wall. 1.6.2 Insert the SIM Card WARNING: BEFORE INSERTING OR CHANGING THE SIM CARD, PLEASE MAKE SURE THAT POWER OF THE DEVICE I ...

Amit IDG400-0TE0C 1. Mobile phone number format 2. A Must filled setting Fill the specify Phone number to activate the Event Management function. User just can handle Event Management function on these phone numbers. Application Check box, default is unchecked. Activate the phone tto have Man ...

Amit IDG400-0TE0C 1. Numberic string format. 2. A Must filled setting The IP Pool of this DHCP Server. It is Ending Address entered in this field. Lease Time 1. Numberic string format. 2. A Must filled setting The Lease Time of this DHCP Server. Value Range: 300 ~ 604800 seconds. 2.1.4 Port Forwarding Virtual Server Item Value setting Description Virt ...

Amit IDG400-0TE0C 2. By default Dynamic IP is selected Dynamic IP The unit will get IP from cellular service.. Static IP The unit will set IP according Static IP Config. PIN Code 1. An Optional setting 2. String format : interger Enter the PIN (Personal Identification Number) code if it needs to unlock your SIM card. MTU Setup 1. A ...