Controlli MDL Series Manual 

01/12 1 DBL021e ISO 9001 CONTROLLI 16010 SANT’OLCESE Genova - Italy Tel.: +39 01073061 Fax: +39 0107306870/871 E-mail: [email protected] Web: www.controlli.eu (1) Factory setting. (2) The values in brackets indicate the starting torque. (3) Models that may be set for voltage or current proportional control, using the o ...

01/12 2 DBL021e TECHNICAL CHARACTERISTICS Power supply 24-110-230 V~ +10.% Consumption 11 VA (17 VA for 230 V~) Dimensioning 15 VA (20 VA for 230 V~) Frequency 50 ... 60Hz Rotation angle MDL3./5.: preset at 90° selectable for 160° adjustable between 55 and 160° MDL2./4./6.: preset at 90° adjustable between 0 and 160° Stroke time See ava ...

01/12 3 DBL021e ELECTRONIC CARD only for MDL3./5. MDLS5 FIG.3 N3028F1 MDLV5 FIG.4 N3030 FIG. 2 FIG.5 N3027 MDLV5 Option The MDLV5 option is preset for voltage control signal. To select the current range it is necessary to move the two jumpers preset in JMP position to SW1 position and to act on P2 and P3 trimmers to defi ne the start and s ...

air conditioning/heating/industrial thermal process. 1st Issue rev. l 01/12 4 DBL021e ISO 9001 OVERALL DIMENSIONS (mm) MDL ACTUATOR DAMPER OPERATING LEVER (MDLA1) DAMPER CONTROL DEVICE (YS7) L1 Power supply L2 M Common V+ Output +15 V- Y Control signal (2) S1 Analogical common S2 0...10V or 0...200 uA S3 10..0V- or 200..0 uA (1 ...