Allure Melanger 80-3.0-400x3-50-A Operator's Manual

OPERATOR‘S MANUAL TU 5131-001-02351413-2016 1 OPERATOR’S MANUAL Melanger 80-3,0-400x3-50-А Melanger 30-2,2-230x1-50-А TU 5131-001-02351413-2016 «ALLURE» LLC FEB 2020 ...

OPERATOR‘S MANUAL TU 5131-001-02351413-2016 2 Identification Data for Type and designation Melanger 80-3,0-400x3-50-А Serial number № Production year 2020 The name and address of the manufacturer LLC «Allure» 115477, Russia, Moscow, Kantemirovskaya str., 29, apt. 94 Phone +7 (495) 989 4 ...

OPERATOR‘S MANUAL TU 5131-001-02351413-2016 3 ATTENTION! Before starting operating the Machine the Manual should be read by operators, repairers and others who are responsible for the transportation of the product, its installation, commissioning, service and maintenance. Please read the ope ...

OPERATOR‘S MANUAL TU 5131-001-02351413-2016 4 Table of Contents 1. Introduction 5 2. General information 6 2.1. Intended use of the Melanger 6 2.2. Personnel qualification 6 2.3. Declaration of conformity 7 2.4. Manufacturer's warranty and liability 9 2.5.General view and the Melanger composi ...

OPERATOR‘S MANUAL TU 5131-001-02351413-2016 5 1. Introduction This "owner's manual" (the Guide) on the Machine should be seen as an integral part of the Machine and must be accessible for maintenance personnel. Purpose of these guidelines is to provide all the information needed for transport ...

OPERATOR‘S MANUAL TU 5131-001-02351413-2016 6 2. General information 2.1. Designation of the Machine This guide applies to the Melanger 80-3,0-400x3-50-А (30-2,2-230-25-А), hereinafter the Melanger, designed for producing chocolate, masses, fillings from its ingredients. 2.2. Personnel qual ...

OPERATOR‘S MANUAL TU 5131-001-02351413-2016 7 2.3. Declaration of conformity During the design of the Melanger, when selecting materials for the Melanger parts and its components, when selecting components, and in the manufacturing process of the Melanger, the Melanger safety was ensured in a ...

OPERATOR‘S MANUAL TU 5131-001-02351413-2016 8  GOST r 27.403-2009 Reliability in engineering. Test plans to control the probability of non-failure operation.  112-78, GOST meteorological glass Thermometers. Technical conditions.  GOST 2991-85 Boxes sealed the deal for cargo weighing ...

OPERATOR‘S MANUAL TU 5131-001-02351413-2016 9 2.4. Manufacturer's warranty and liability The manufacturer guarantees the compliancy of Machine with the above standards, directives and regulations, subject to following the terms of transportation, storage, installation and operation of the ...

OPERATOR‘S MANUAL TU 5131-001-02351413-2016 10 2.5 General appearance and composition of the Melanger General view of the Melanger, the location and designation of parts is presented in Fig. 2-1. List of components of the Melanger is given in table 2.1. Figure 2-1 Note: Contro ...