Siemens SINAMICS G110M Getting Started

SIMOGEAR geared motors Getting Started Edition 04/2018, Firmware V4.7 SP10 04/2018, FW V4.7 SP10 A5E36100338B AG Fundamental safety instructions 1 Description 2 Installation 3 Commissioning 4 Troubleshooting 5 ...

Postfach 48 48 90026 NÜRNBERG GERMANY Document order number: (null) Ⓟ 04/2018 Subject to change Copyright © Siemens AG 2018. All rights reserved Legal information Warning notice system This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent damage to property. The ...

Getting Started, 04/2018, FW V4.7 SP10, A5E36100338B AG 3 Table of contents 1 Fundamental safety instructions .............................................................................................................. 5 1.1 General safety instructions ....................................................... ...

Distributed converter for SIMOGEAR geared motors 4 Getting Started, 04/2018, FW V4.7 SP10, A5E36100338B AG 4.7.5 Identify motor data ................................................................................................................. 90 4.8 Using the AS-i Programmer ............................................................. ...

Getting Started, 04/2018, FW V4.7 SP10, A5E36100338B AG 5 Fundamental safety instructions 1 1.1 General safety instructions WARNING Electric shock and danger to life due to other energy sources Touching live components can result in death or severe injury. • Only work on electrical devices when you are qual ...

1.1 General safety instructions Distributed converter for SIMOGEAR geared motors 6 Getting Started, 04/2018, FW V4.7 SP10, A5E36100338B AG WARNING Risk of electric shock and fire from supply networks with an excessively low impedance Excessively high short-circuit currents can lead to the protective devices not being able to ...

1.1 General safety instructions Distributed converter for SIMOGEAR geared motors Getting Started, 04/2018, FW V4.7 SP10, A5E36100338B AG 7 WARNING Electric shock due to unconnected cable shield Hazardous touch voltages can occur through capacitive cross-coupling due to unconnected cable shields. • As a minimum, connect cabl ...

1.1 General safety instructions Distributed converter for SIMOGEAR geared motors 8 Getting Started, 04/2018, FW V4.7 SP10, A5E36100338B AG WARNING Spread of fire from built-in devices In the event of fire outbreak, the enclosures of built-in devices cannot prevent the escape of fire and smoke. This can result in serious perso ...