DEI Matrix 3 Owner's Manual

To protect against parking lot carjacking, arm the VRS before leaving the vehicle. The system will now trigger automatically the next time you or anyone drives the vehicle. This helps to protect the vehicle if someone takes your keys and remote trans- mitter by force in a parking lot. VRS triggered sequence Fifteen secon ...

DEI Matrix 3 transmitter functions The receiver uses computer-based code learning to learn the transmitter buttons. This makes it possible to assign any trans- mitter button to any receiver function. The transmitter initially comes programmed with Standard Configuration, but may also be customized by an authorized dealer. The buttons ...

installation options The system has many options that may require extra parts and labor. A few of the options are listed below: ➤ Progressive Unlocking: In most cars with electric power door locks, the system can be configured so that when disarmed, only the driver’s door unlocks. A second press of the disarm button ...

DEI Matrix 3 Shock Sensor: This is a sensor mounted in the vehicle that is designed to pick up impacts to the vehicle or glass. Siren: Noise generating device usually installed in the engine compartment of the vehicle. It is responsible for generating the "chirps" you hear, as well as the six tones you hear while the alarm is trigger ...

DEI Matrix 3 panic mode If you are threatened in or near your vehicle, you can attract atten- tion by triggering the system with your remote! Just press for 1.5 seconds, and you will enter Panic Mode. The siren will sound and the parking lights will flash for the programmed siren duration. To stop Panic Mode at any time, press again. ...

DEI Matrix 3 Three seconds later, the siren output changes to a continuous blast. This progressive response gives you time to disarm the security system with your transmitter if you inadvertently open the door while the system is armed, while still providing an instant response (even if the door is immediate- ly closed). ➤ Turning o ...

DEI Matrix 3 owner recognition Owner Recognition is a feature available exclusively from Directed®. Using a Directed® Bitwriter hand-held programming tool, your dealer can program many of the system settings. The programmer makes it possible to program different settings for each transmitter that is used with the system. Then, when ...

DEI Matrix 3 Three minutes after the constant siren output begins, the flashing parking lights and the siren will stop. The starter interrupt will remain active until the system is disarmed. If the door is opened or the ignition is turned off and on in an attempt to restart the car, the siren and light flashing will begin again. disa ...

DEI Matrix 3 The system also can be programmed to arm itself automatically (called passive arming). If the system is programmed for passive arming, it will automatically arm 30 seconds after the ignition is turned off and the system "sees" you leave the vehicle by opening and closing a door. Whenever the system is in its 30- second pa ...

DEI Matrix 3 what is included ➤ A 3-channel control module ➤ A pair of four-button transmitters ➤ An XHF receiver/antenna ➤ A shock sensor ➤ A siren ➤ A red LED status indicator light ➤ A push-button Valet switch ➤ Your warranty registration ➤ Fault-proof starter interrupt ready circuitry (may require additional labo ...

DEI Matrix 3 security && cconvenience expansions Here we have listed only some of the many expansion options available. Please contact your dealer for a complete list of all the options available to you. Audio Sensor: Metal on glass, glass cracking, and breaking glass each produce distinctive acoustic signatures. The 506T audio senso ...

computer and the TechSoft Programmer, the full triggered response can be programmed for any duration ranging from 1 to 180 seconds. ➤ False Alarm Control Technology (FACT) on or off: Please refer to the FACT section of this manual for a complete expla- nation of how FACT operates. If FACT is programmed off, the securit ...