Record Power BS10 Original Instruction Manual

BS10 10" Standard Bandsaw Important For your safety read instructions carefully before assembling or using this product. Save this manual for future reference. Always wear safety glasses when using woodworking equipment. Always read the instructions provided before using woodworking equipment. i Kg Version 3.1 February 2014 To reg ...

people assemble the machine. 1 Explanation of Symbols 2 Health & Safety Guidance 3 Additional Health & Safety Guidance for Bandsaws 4 Record Power Guarantee 5 Getting to Know the Bandsaw 6 Specifications 7 Assembly of the Optional Leg Stand 8 Machine Assembly 9 Machine Setti ...

TAKE THE APPROPRIATE ACTION WHEREVER THE WARNINGS ARE USED. 1. Explanation of Symbols i i i ii ii i Kg Mandatory Instructions Warning Read and fully understand the instruction manual before attempting to use the machine. Indicates an instruction that requ ...

Ensure that you carefully read and fully understand the instructions in this manual before assembly, installation and use of this product. Keep these instructions in a safe place for future reference. WARNING: for your own safety, do not attempt to operate this machine until it is completely assembled and installed accor ...

11. Consider the work area environment • Do not expose the machine to rain or damp conditions. • Keep the work area well lit and ensure that there is artificial lighting available when there is insufficient natural light to effectively light the work area. Lighting should be bright enough to eliminate shad ...

Safe Operation 1. Familiarise yourself with the machine • Machining operations using bandsaws have a history of serious accidents. Most result from contact with the moving blade while presenting material to the blade or moving it from the table. Other minor accidents can occur whilst setting, cleaning, adjusti ...

“Products” means the Products sold by Record Power subject to these terms and conditions; “Record Power” is Record Power Limited, whose company registration number is 4804158 and registered office address is Centenary House, 11 Midland Way, Barlborough Links, Chesterfield, Derbyshire S43 4XA and sells through a network of ...

Max depth of cut: 100 mm Throat depth: 245 mm Table size: 340 x 335 mm Max width blade to rip fence: 135 mm Table height (from floor without leg stand): 379 mm Table height (from floor with leg stand): 1057 mm Extraction port: 40 mm Motor power: 230 V / 50 Hz / 370 W Weight: 35 kg Size (without stand): H887 x W5 ...

A B C D E F G H The stand comes as a self assembly unit: A Upper frame B Long mid brace supports x 2 C Short mid brace supports x 2 D Legs x 4 E Rubber feet x 4 F Long fixing bolts and nuts x 4 G Short fixing bolts, nuts and washers x 16 H Washers x 40 CAUTION! The machine is heavy. Additional help or a suitable liftin ...

Stand Assembly 1. Locate the four legs (D) and secure them to the upper frame (A) using the nuts, bolts and washers supplied. Ensure that the tops of the legs are located on the inside of the top frame, Fig 7.1. 2. The locating holes a third of the way down each leg are for securing the long mid brace suppor ...