Record Power DML320 Original Instruction Manual

DML320 Cast Iron Electronic Variable Speed Lathe Important For your safety read instructions carefully before assembling or using this product. Save this manual for future reference. Always wear safety glasses when using woodworking equipment. Always read the instructions provided before using woodworking equipment. i Kg Version ...

2 General Health and Safety Guidance 3 Additional Health and Safety Guidance for Woodturning Lathes 4 Record Power Guarantee 5 Specifications 6 Contents of the Package 7 Getting to Know Your Lathe 8 Assembly 9 Assembly of the Optional DML305/A Leg Stand 10 Operation 11 Maintenance 12 Intended Use of the Lathe and Basic ...

Please ensure that you take the appropriate action wherever the warnings are used. 1. Explanation of Symbols i i i ii ii i Kg Mandatory Instructions Warnings Read and fully understand the instruction manual before attempting to use the machine. Indicates an instruction that requ ...

Ensure that you carefully read and fully understand the instructions in this manual before assembly, installation and use of this product. Keep these instructions in a safe place for future reference. WARNING: for your own safety, do not attempt to operate this machine until it is completely assembled and installed acc ...

• If the work area is to be left unattended, all machinery should be switched ‘OFF’ and isolated from the mains power supply. 13. Store machines safely when not in use • When not in use, machines should be stored in a dry place, out of reach of children. Do not allow persons unfamiliar with these instructio ...

Woodturning Lathes Safe Operation Familiarise yourself with the machine • Machining operations using wood turning lathes have a history of serious accidents. Most serious accidents resulted from the work piece being thrown from the lathe whilst turning. Other accidents can be caused by loose clothing being d ...

“Products” means the Products sold by Record Power subject to these terms and conditions; “Record Power” is Record Power Limited, whose company registration number is 4804158 and registered office address is Centenary House, 11 Midland Way, Barlborough Links, Chesterfield, Derbyshire S43 4XA and sells through a network of ...

1. Carefully lift the lathe from the carton and check that all of the components and contents have been included. Place parts on a protected surface. 2. Clean all rust protected surfaces with white spirit. Do not use gasoline, paint thinner, mineral spirits, etc. These may damage painted surfaces. Make sure the area is well venti ...

3 Motor positioning lever 4 Motor pulley access hatch 5 Headstock 6 Indexing lock 7 Hand wheel 8 Headstock cover 9 Spindle 10 4 prong drive centre 11 Tool rest 12 Tool rest holder 13 Tool rest holder locking lever 14 Tool rest locking lever 15 Revolving centre 16 Tailstock 17 Digital spindle speed readout 18 Spindle ...

Loosen the locking lever and insert the tool rest into tool rest holder, Fig 8.1, adjust the height as required and tighten the locking lever, Fig 8.2. Fitting the Tool Holder to the Lathe Bed On the rear of the lathe bed, below the headstock are 2 tapped holes for mounting the tool holder, Fig ...