Omron SYSMAC 3G8F5-CLK11-E Operation Manual

SYSMAC 3G8F5-CLK11-E 3G8F5-CLK21-E OPERATION MANUAL ...

Operation Manual Revised February 1999 ...

and only for the purposes described in this manual. The following conventions are used to indicate and classify precautions in this manual. Always heed the information provided with them. Failure to heed precautions can result in injury to people or ...

vii PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Intended Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 General Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

viii SECTION 8 Network Interconnections . . . . . . . . . . . . . . . . . . . . . . . . . 8-1 What is Network Interconnection? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2 Routing Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

This manual describes the installation, setup, and operation of the 3G8F5-CLK11-E/CLK21-E Controller Link Support Boards and includes the sections described below. Controller Link Support Boards are used to connect IBM PC/AT or compatible computers to a Controller Link Network. The following three manuals are directly related to applica ...

The information contained in this section is important for the safe and reliable application of the Controller Link Sup- port Board. You must read this section and understand the information contained before attempting to set up or oper- ...

xii 1 Intended Audience This manual is intended for the following personnel, who must also have knowl- edge of electrical systems (an electrical engineer or the equivalent). • Personnel in charge of installing FA systems. • Personnel in charge of designing FA systems. • Personnel in charge of managing FA syst ...

• Where there is excessive dust, saline air, or metal powder. • Where the Controller Link Support Board is affected by vibration or shock. • Where any water, oil, or chemical may splash on the Controller Link Support Board. Caution The operating environment of the ...

xiv • Use crimp terminals for wiring. Do not connect bare stranded wires directly to terminals. Connection of bare stranded wires may result in burning. • Double-check all the wiring before turning ON the power supply. Incorrect wir- ing may result in burning. • Wire correctly. • Double-check all the connectors bef ...