ZyXEL Communications 2R-P1C Operation & User’s Manual

P-2301/2R-P1C VoIP ATA / Station Gateway P-2301RL-P1C VoIP ATA / Station Gateway with Lifeline User’s Guide Version 3.60 3/2007 Edition 1 ...

2 1 Overview This guide helps you set up and use your ZyXEL P-2301R- P1C, P-2301RL-P1C or P-2302R-P1C (the “ZyXEL Device”). This guide contains the following sections: Section Page Description Installation Requirements 4 A checklist of things you need before you install the ZyXEL Device. Making Hardware Connect ...

The following figure shows a typical way to use your ZyXEL Device. • When you make a phone call over the Internet, you use a telephone (A) to dial the number. The P-2301R-P1C and P- 2301RL-P1C support one telephone connection, and the P- 2302R-P1C supports two telephone connections. The telephone is connected t ...

4 • P-2301RL-P1C only: use your telephone (A) to make calls over the regular telephone network (PSTN or Public Switched Telephone Network). The following table contains useful information about your ZyXEL Device. 2 Installation Requirements Make sure you have the following things before you set up your ZyXEL Devi ...

3 Making Hardware Connections 1 LINE (P-2301RL-P1C only): Use a telephone cable to connect the telephone jack to this port. ...

6 2 PHONE / PHONE 1: Use a telephone cable (and any telephone adaptor provided with your ZyXEL Device) to connect your telephone to this port. 3 PHONE 2 (P-2302R-P1C only): connect another telephone to this port. If you have only one phone, use the PHONE 1 port. 4 ETHERNET: Use an Ethernet cable to connect your com ...

2 Enter http://192.168.1.1 as the address. 3 Click Login. 4 Type a new password, re-type it to confirm, and click Apply. The next time you log in, you should not see this screen. ...

8 5 Click Go to Advanced setup. 6 The Status screen appears. Click the Wizard icon ( ) in the upper right corner. If the INTERNET light is green, go to section 4.34.3 on page 16. Otherwise, go to section 4.24.2 on page 94.2. ...

4.2 Connection Wizard If you subscribe to a Roadrunner service, you cannot use the Connection Wizard to set up your Internet connection. In this case, please use the Network > WAN > Internet Connection screen to enter your information. " You must have an Internet account set up and ready to use to complete this s ...

10 2 Click Next. 3 System Name is used to identify the ZyXEL Device on the network. Use the default value, unless you know the name is already used in the network. Domain Name (optional): Enter the appropriate name, if there is one, or use the default value. Click Next. 4 This screen has different fields, depending ...