ZyXEL Communications ZyXEL ZyAIR B-400 Quick Installation Manual

— 2 — FCC Warning The ZyAIR B-400 has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate ...

— 3 — Table of Contents ZYAIR B-400 FEATURES ....................................4 PACKAGE CONTENTS........................................5 PHYSICAL DETAILS ...........................................6 HARDWARE INSTALLATION ............................8 WIRELESS NAVIGATOR INSTALLATION.......9 STARTUP AND LOGIN ...... ...

— 4 — ZyAIR B-400 Features LAN Features ¾ DHCP Support – Enable the adapter to act as a DHCP client to receive an IP address from a DHCP Server in the wired Ethernet LAN ¾ Built-in 10BaseT LAN Port – Designed to connect the adapter with any Ethernet-ready device, such as a desktop PC, print server and network pr ...

— 5 — Package Contents 9 One ZyAIR B-400 11Mbps Wireless LAN Ethernet adapter 9 One installation CD-ROM (Wireless Navigator Utility & User’s Manual Included) 9 One power adapter 9 One quick installation guide If any of the above items are damaged or missing, please contact your dealer immediately. ...

— 6 — Physical Details Rear Panel INIT Button “INIT” means “Initialize”. Pressing the button will reboot the device and restore the settings to the factory default settings. LAN Cable Selection Switch X: Crossover: the RJ-45 port Tx and Rx lines are reversed. Use this setting when using a straight cable conne ...

— 7 — LAN Connection Use a standard straight, UTP Ethernet cable (RJ- 45 connector) to attach the PC, hub/switch or broadband router/modem to this port. Power Input Only use the power adapter supplied with the adapter LED Indications LED Color Status Description ON The LAN port is linked. OFF The LAN port is not linke ...

— 8 — Hardware Installation The following illustration is an example showing how to install the B- 400 adapter with a PC. Be sure to use the supplied power adapter. Note! The B-400 may also be connected to other Ethernet-ready devices, such as print servers. ...

— 9 — Wireless Navigator Installation The Wireless Navigator Utility is provided to allow users to easily configure the B-400 adapter using any Windows-based PC. This section describes procedures for installing the Wireless Navigator Utility onto the PC. Note! Please make sure that the PC already has the TCP/IP protoc ...

— 10 — Step 2: After the InstallShield Wizard preparation is finished, the following window will be shown. Click the Next button to continue. Step 3: Type in the User Name and Company Name, and click the Next button to continue. ...