Amit RB-MVB/AN02 Operation Manual

in ESD and EMD connection, Ethernet interface and BNC connector for triggering. Device is supplied from factory only with loader. Before first use all required domains must be loaded into device (see Programming manual).  2 × MVB i ...

Amit RB-MVB/AN02 Wrapped analyser is stored in a paper box. Package dimensions are listed in chapter 4. Technical parameters. Sticker on the box contains following information: Item Description TYPE RB-MVB/AN02 NETTO 0.90 kg BRUTTO 1.14 kg QTY 1 pc S/N Serial number AMiT l ...

Amit RB-MVB/AN02 The unit has a producer type label attached to its rear side. Data located on type label are listed in the table above, for example of label design see Fig. 4 - Example of AMiT type label. Description Data Note – Logo AMiT Producer logo – QR code Producer QR code TYPE RB-MVB/AN02 Product type ...

Analyser RB-MVB/AN02 is fitted with producer type label on its side. xxxxxxx S/N: WEIGHT: 0.87 kg DATE: 09.06.2015 MAC: xx-xx-xx-xx-xx-xx HiPot: HiPot - OK TEST: OK-JE LDR: 1.0 POWER: 24 V DC / 0.6 A TYPE: RB-MVB/AN02 1 Fig. 3 - Label location Number Description 1 Type label Legend ...

Amit RB-MVB/AN02 termination module TRM-MVB/F EMD or TRM-MVB/M EMD. X6, X7 Fig. 7 - Location of MVB-EMD connectors Connector type: D-sub DE-9, socket Connector Pin Signal Description X6, X7 1 A.Data_P A line positive wire 2 A.Data_N A line ne ...

Amit RB-MVB/AN02 TEST: OK-JE LDR: 1.0 POWER: 24 V DC / 0.6 A TYPE: RB-MVB/AN02 50 187 203 228 6 78 113 Fig. 1 - RB-MVB/AN02 mechanical dimensions in mm ...

Amit RB-MVB/AN02 Analyser RB-MVB/AN02 disposes with MVB interfaces adapted for EMD (Electrical Middle Distance) and ESD (Electrical Short Distance). Coupling connector is D-sub DE-9 plug and socket, fixed to counterpart by bolt with M3 thread. Connectors are internally concatenated. 8.1. MVB-ESD Terminating resisto ...

Amit RB-MVB/AN02 Bus Administrator MVB device with Bus Administrator functionality is able to work as MVB bus Master. This function supposes the device is able to transfer the process data and reports as well as transmit and receive the Device Status type information. Electrical Middle Distance This is a type o ...

Amit RB-MVB/AN02 Analyser RB-MVB/AN02 is equipped with triggering output with BNC connector. Output signal has a 5 V level; output impedance is 50 Ω. The function is given by the software. X5 Fig. 12 - Trigger output connector location ...