Editware EW2 Tech Note

1 of 3 03/13/2002 TECH NOTE EW2 - CGA to VGA Converter Mod. 3/13/02 INTRODUCTION The EW2 scan doubler enables a VPE editor with CGA (TTL) video display to be connected to a standard VGA / XGA monitor. This applies to VPE-131 through VPE-251 ...

2 of 3 03/13/2002 MAKING ADJUSTMENTS After you have made your connections and you have connected to a VGA monitor, you may find that adjustments need to be made to improve the appearance of the on-screen image. To enter the programming mode, first plug in the PS/2 keyboard, remove power and wait 3 seconds, re-apply power, and if ...

3 of 3 03/13/2002 SPECIFICATIONS INPUT Description: 6-bit TTL video Separate TTL H & V syncs: Horizontal~15KHz to 22KHz Vertical ~ 50-60Hz Connector: 9-pin ‘D’ male CGA EGA 1. Connect to Ground …………………. Connect to Ground 2. Leave open …………………………… RED intensity 3. RED i ...