Calsense ET2000 Programming Manual

1-800-572-8608 FAX:760-438-2619 www.calsense.com ET2000 PROGRAMMING GUIDE CONTROLLER STATUS (adjust stations) No Stations are Watering NEXT SCHEDULED IRRIGATION IS AT : 12:00 AM on Saturday Aug 17, 2002 Aug 16 2002 Sat 10:45:03 AM Stock No. 4039 Rev 09/02 ...

1. ET2000 Key Pad Description ........................................................................................................................ 4 2. ET2000 Controller Screen Map ..................................................................................................................... 5 3. What Can Be Programmed At Each Scr ...

15. Reports .................................................................................................................................................... 20 This Month / Last Month ......................................................................................................................... 20 24 Month History ............ ...

mon controller functions now. The following is a list of HOT keys and a description of each key function. STOP The STOP key will stop any currently running Scheduled Watering Cycle, Manual Cycle, Test Cycle, Manual Spe- cial Sequence or Master Valve override. MANUAL The MANUAL key will perfor ...

The Screen Map below shows the series of keys to be pressed to access the various screens in the ET2000 Controller. The chart on the following page explains what can be programmed at each of the screens. Station Order Irrigation Details ET / Rain Table Log Lines Diagnostics Master Valve Pump Output Flow Meter Weather Flow Se ...

Programs & Stations Set use of 12 month schedule Start Times & Water Days Set program start time Select program description Set number of water days in schedule Set water days Set program hold-over time Set all the above for each month of the year (optional) (optional) If 12 month schedule is enabled : Finish Times ...

This guide will explain the operation and programming of the ET2000 Controller (for programming the more advanced features of the ET2000, see our ET Based Water Management guide). The following describes the conventions used throughout this guide. When instructed to press a key, the name of the key will be CAP ...

From the Main Menu Press the PROGRAMS & STATIONS Menu Key, then Press the START TIMES & WATER DAYS Menu Key, the Start Times & Water Days screen will appear (shown below). Press either ARROW Key to move the cursor to the setting you wish to change, Press the PLUS or MINUS Key to change the highlighted setting. When at the Start ...

Station Settings From the Main Menu Press the PROGRAMS & STATIONS Menu Key, then Press the STATIONS Menu Key, the Station Programming screen will appear (shown below). Press either ARROW Key to move the cursor to the setting you wish to change, Press the PLUS or MINUS Key to change the highlighted setting. When at the Station Program ...

From the Main Menu Press the PROGRAMS & STATIONS Menu Key, then the STATION-TO-STATION COPY Menu Key. The Station To Station Copy Screen will appear (shown below). From the Station To Station Copy screen you can copy the programming from one station to another station, copy the programming from one station to all stations on any ...