Strand 76910 Operation & User’s Manual

WWW.STRANDLIGHTING.COM 31 CONTACT OPTIONS AND ACCESSORIES CONTROL OPTIONS Catalog# Description 76960 Master Control Option 76961 Auxiliary Control Option (operates with a master panel) 74161 Ethernet Control Module 76924 UL 924 Kit 76990 Barrier Kit RELAY OPTIONS Catalog# Description 76991 Relay, 1-pole 76992 Relay, ...

Strand 76910 WWW.STRANDLIGHTING.COM 2 1 PREFACE ABOUT THIS GUIDE The document provides installation and operation instructions for the following Contact Low Voltage Relay Panel products: Contact Relay Panels - individually fed • 76910 Relay Insert Panel, 12-circuit • 76911 Relay Insert Panel, 24-circuit • 76912 Relay Inse ...

WWW.STRANDLIGHTING.COM 28 48-WAY RELAY INSERT PANEL W/ BREAKERS (76923C) Number of Circuits: 48 (Individually replaceable 20A latching relays) Relay Types & Ratings: Type 1- 20A High-Performance Single Pole Latching 120, 230, 277, 347VAC, 50-60Hz, 1.5HP @ 120VAC. Utilizes 1 Contact relay panelboard space. Type 2 - 2 ...

Strand 76910 WWW.STRANDLIGHTING.COM 13 LOCAL PRESETS CONFIG SUB MENU OPTIONS COMMENTS Relay N/A Displays current relay number . Preset 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 Selects the preset to be programmed/ assigned to Fade Rate (min.) None / 0:01 / 0:05 / 0:10 / 0:15 / 1:00 /2:00 / 4:00 / 12:00 Selects the fade rate for a preset. ...

Strand 76910 WWW.STRANDLIGHTING.COM 22 APPENDIX B SPECIFICATIONS 12-CIRCUIT RELAY PANEL (76910) Number of Circuits: 12 (Individually replaceable 20A latching relays) Relay Types & Ratings: Type 1- 20A High-Performance Single Pole Latching 120, 230, 277, 347VAC, 50-60Hz, 1.5HP @ 277VAC. Utilizes 1 Contact relay panelboard space. ...

Strand 76910 WWW.STRANDLIGHTING.COM 6 MOUNTING THE PANEL To mount panel: Step 1. Locate a suitable location for mounting the panel. (Refer to “Location and Clearances”.) Step 2. Mount panel utilizing pre-punched mounting holes, as indicated in Figure 3, as follows: a. Remove front cover (if installed). b. Ensure that wall is ...

Strand 76910 WWW.STRANDLIGHTING.COM 21 from outer jacket. Step 3. Terminate approximately 1/2” (12.2mm) from end of conductors on Type 110 punch down block or con- nector per schedule (T568B) • Maximum untwist of conductors to terminations is 1/2” (12.2mm) • Trim excess leads. Step 4. Shrink tubing and add appropriate I ...

Strand 76910 WWW.STRANDLIGHTING.COM 19 DMX512 DMX512 TERMINAL XLR PIN COLOR CODE WE (E.G., BELDEN #8132) IECA BELDEN STANDARD CATEGORY 5E GND 1 Drain Wire (Shield) Drain (Shield) Drain (Shield) Brown White/Brown DMX - 2 White w/ Blue Black Black (of Red pair) Orange DMX + 3 Blue w/ White White Red White/Orange AUX - 4 White w/ O ...

Strand 76910 WWW.STRANDLIGHTING.COM 4 CIRCUIT BREAKER MODELS (MLO - MAIN LUG ONLY) Some models of the Contact Low Voltage Lighting Control Panel include internal branch circuit breakers. In this case, a breaker access door is included on the front panel. MLO option is only available on the following models: MODEL DESCRIPTION VOL ...

Strand 76910 WWW.STRANDLIGHTING.COM 20 DO NOT convert these cables to home runs. 4. Maximum station quantity subject to power supply and system requirements. Please consult factory for specifi c information. TERMINATION OF SHIELDED CABLE DIMENSION NAME MINIMUM MAXIMUM FOR TERMINAL MAXIMUM FOR LXR (IN-LINE) A Remove Cable J ...