DigiTech VX400 Operation & User’s Manual

Effects are routed out the XLR outputs. 1/4MOD - The Mic signal with the Modulation Effects is routed out the 1/4” outputs only. All other sources and Mic with all Effects are routed out the XLR outputs. Line Right Mic In Instrument In Line Left Mic Model ...

1.The warranty registration card must be mailed within ten days after purchase date to validate this warranty. 2. DigiTech warrants this product, when used solely within the U.S., to be free from defects in materials and workmanship under normal u ...

DigiTech VX400 I get audio dropout while I’m recording. • Try increasing the latency slider in the Audio settings. • Try reducing the number of tracks in your project (mute won't help, you either have to "archive" the tracks, or delete them) • Close any other open programs besides Pro Tracks check Windows Task Manager to make sure there a ...

DigiTech VX400 1. From the Pro Tracks menu bar, select Options>Audio. The Audio Options window will appear. Click the Drivers tab. 2. Under the Input Drivers settings, select DigiTech USB 1-2 In/Out and DigiTech USB 3-4 In Only and deselect all other options. 3. Under the Output Drivers settings, select DigiTech USB 1-2 In/Out and de ...

DigiTech VX400 After tracks have been recorded, you may want to record other tracks that play along with them. To record a new track or tracks with previously recorded tracks, follow these steps: 1. From the preset display, press and hold the SELECT button to enter the SETUP row in the Vx400’s matrix. 2. Select the sources to record using the US ...

DigiTech VX400 Envelope The Envelope is an automatic Wah effect that alters your sound based upon the dynamic attack of the vocal part being sung or instrument being played. Parameter 1 - The Number 2 Knob adjusts the amount of Wah sweep once the Wah is triggered. Ranges from 1 to 99. Parameter 2 - The N ...

DigiTech VX400 When Pro Tracks is first launched after installation, you will have to configure the MIDI device and Audio settings to recognize the Vx400 as the hardware you want to use. These procedures must be followed to ensure you will be able to record audio through all of the Vx400’s inputs and to enable the hands-free recording capabilities the ...

DigiTech VX400 BULLET Harmonica Mic Brawner™VM1 Large Diaphragm Condenser BRAWNY Neumann™M149 Large Diaphragm Condenser NEU149 Lawson™L47MP Large Diaphragm Tube LAWLES AKG™414 ULS Large Diaphragm Condenser SLVGRL Sennheiser™421 MD Large Diaphragm Dynamic SENDYN Audio Technica™AT4050 Large Diaphragm Condenser ATCOND ...

DigiTech VX400 Vx400 is connected to your computer via USB. During performance, the knobs control the Bass EQ, Mid EQ, Mid Frequency,Treble EQ, and Master Level. If the Vx400 is connected to the computer via USB, the performance functions of knobs 2, 3, and 4 are Playback Mi ...

Damping - The Number 3 Knob controls the amount of sound which is absorbed in the simulated environment. Ranges from 0 to 99. Reverb Level - The Number 4 Knob adjusts the volume of the Reverb. Ranges from 0 to 99. Master Level - The Number 5 Knob controls the Vx4 ...

DigiTech VX400 • Try the Wave Profiler under Options->Audio. This seems to fix most problems. Otherwise, try using MME drivers in the Options->Audio->Advanced, Driver Mode selection. These are the safest drivers but also have the most latency. • Try increasing the latency slider in the audio settings. Hands-Free r ...