Socket D750 Setup

Phone 1 (800) 622-6484 Fax 1 (866) 937-8254 [email protected] www.choose2rent.com page 1 of 6 1. Powering ON: Press and hold down the small power button until the LED turns blue and the scanner beeps twice 2. Powering OFF: Press and hold down the small power button until the scanner beeps twice. 1. Scanning Barcodes After connecting the sc ...

3. Pair the Scanner with the Apple device: - Power on the Scanner - Make sure the scanner is set to HID Keyboard mode (default). If needed you can switch to iOS Mode (explained on page 3). - Enable Bluetooth on the Apple device. Search for Bluetooth devices - In the list of found devices, select Socket CHS [xxxxxx]. If prompted, tap Pair. 4. Unpa ...

• Pair and connect the D750 to your device prior to placing the scanner in Auto Mode. The Scanner is not discoverable when in Auto Mode and in the Stand. This facilitates a fast connection to the current connected device when powered on (for example the start of the new business day). • The Trigger button must be pressed to disable Presenta ...

HID MODE Keyboard Pop-up Enable The scanner emulates the keyboard in HID mode. So scanned barcode data will be input into the text field. The following steps show how to access the onscreen keyboard while connected to the scanner in HID mode. (Best used for Windows & Android) 1. Make sure the scanner is connected to your Apple device in HID mode. ...

Scan Tips • Be sure to place the QR code 4-6 inches away from the scanner and slowly back away the QR code till a beep sound is made. • Do not wave! Move in and out! • If scanning a QR code on a mobile device, be sure to have the device brightness set to highest. (Especially devices with privacy screens) • Be sure to enlarge the QR code ...